B2B sales prospecting: the complete guide (2026)
Sales prospecting is finding the companies and people who fit your offer and starting the first conversation, usually to book a meeting. Expect small rates: in Gong's analysis of 300M+ cold calls the average rep reached the prospect on 5.4% of dials and booked a meeting in 4.6% of conversations. Start from a written ICP and a lawful list, research each account for five minutes, run a three-week cadence across phone, email and LinkedIn, and protect daily call blocks.
Articles on this topic
Ideal customer profile for outbound: how to define it and test it with campaigns
Define an ideal customer profile for outbound sales in five layers, then test it with one campaign per segment and compare meetings and reasons for no.
· 8 min readOutboundB2B lead generation for sales teams: 6 sources of leads and how to turn them into meetings
Six B2B lead sources a sales team can use (lists, referrals, events, LinkedIn, inbound, partners), how to qualify each and turn them into meetings.
· 9 min readDataB2B lead lists and the GDPR: a practical guide for sales teams
B2B lead lists GDPR guide: where lists come from, legitimate interest and the balancing test, informing contacts, retention, opt-outs and a checklist.
· 9 min readProspectingProspecting software: 6 kinds of sales prospecting tools compared (2026)
Data providers, sequencers, LinkedIn tools, dialers, CRMs and calling workspaces: what each kind of prospecting tool does, and what Ringlane is and is not.
· 12 min readWhat sales prospecting is
Sales prospecting is finding the companies and people who fit what you sell, and starting the first conversation with them. You decide who you want as a customer, find the right person inside that company, and reach out by phone, email, LinkedIn, at an event or through a referral. The output of prospecting is a qualified first meeting. The sale comes later.
A few words get mixed up, so here is how this guide uses them:
- Target account: a company on your list that fits your ideal customer profile.
- Prospect: a person at a target account who could buy or influence the purchase, and whom you have not spoken to yet.
- Lead: a person or company that showed interest or that you are actively working, depending on your team. Agree on one definition and write it down.
- Opportunity: what a prospect becomes after a qualified meeting, when there is a real chance of a deal.
This guide is for business owners, sales managers, SDRs and callers at B2B companies, with extra detail for Belgium and the Netherlands. It follows the work in the order you do it: who to target, where the data comes from, which rules apply, how to reach people, what to say, what to measure, and how to organise your week. The four articles above go deeper on the ideal customer profile, lead sources, the GDPR and prospecting software.
Prospecting vs lead generation
Lead generation produces names and interest; prospecting turns chosen names into conversations. Lead generation is often run by marketing and works one-to-many: content, ads, webinars, trade fair stands and forms that bring in people who raised their hand. Prospecting is sales work and runs one-to-one: you pick a company, research it and contact a person.
The two feed each other. Inbound leads are prospects who already know you, so they deserve fast follow-up instead of a three-week cadence; see speed to lead. Our article on B2B lead generation covers six sources of leads for a sales team, and appointment setting vs lead generation explains the difference when you buy either from an agency.
Prospecting vs cold calling
Cold calling is one prospecting method; prospecting is the whole job around it. A cold call is a phone call to someone who does not know you. Prospecting also includes building the list, research, email, LinkedIn, events, referrals and the follow-up that turns one call into a meeting. Many B2B teams still use the phone as the backbone: in The Bridge Group's 2025 survey of 351 B2B companies, the median SDR logged 112 activities a day, of which 44 by phone, 41 by email, 19 on LinkedIn and 8 other.
For the phone side in depth, read telephone prospecting and our cold calling guide. For the wider motion, with team and process, see the outbound sales guide.
The prospecting process in seven steps
Prospecting works best as a fixed loop of seven steps that you repeat per campaign.
- Define the ideal customer profile: which companies, which people, and why now.
- Build the target account list: from a register or data provider, with the right contact and a working number.
- Check the rules: the GDPR for the contact's data, and the calling and email rules of each country.
- Research each account: five minutes to find one reason to contact them.
- Reach out in a cadence: calls, emails and LinkedIn touches in a planned order.
- Log every outcome and plan the next step: no lead without a dated next action.
- Measure weekly and change one thing: list, timing, message or channel.
Each step has an owner, a tool and a result. If you want the same loop written as a process for a team, with handover to the account executive, use the outbound sales process in 8 steps.
Step 1: the ideal customer profile and target account list
Your ideal customer profile decides who goes on the list, and the list decides most of your results before anyone picks up the phone.
An ideal customer profile (ICP) describes the companies most likely to buy, stay and pay well. It is not a list of everyone who could buy. A persona describes the people inside those companies: their role, what they are measured on and what worries them. You need both: the ICP to choose accounts, the personas to choose people and words.
Build the ICP from your own customers, not from a brainstorm. Take your ten to twenty best customers, the ones who pay on time, stay, are easy to serve or sent you others, and look for what they share. Then write it down as a few lines you can test.
An ICP template you can fill in
| Field | Question | Example |
|---|---|---|
| Industry | Which sectors buy most and churn least? | Construction and installation companies (NACE 41 to 43) |
| Size | Below which size is there no budget, above which no fit? | 20 to 200 employees |
| Region | Where can you serve and visit customers? | Flanders and the southern Netherlands |
| Situation | What is true at the moment they buy? | Hiring field staff, more than one site |
| Trigger | What event makes them look now? | New operations manager, new branch, tender won |
| Buyer roles | Who decides, who uses, who blocks? | Managing director decides, operations uses, finance checks |
| Exclusions | Who looks right but never buys? | Companies inside a group that buys centrally |
The example is illustrative. Replace each cell with what your own customer data shows, and treat every line as a guess until a campaign confirms it. Our article on the ideal customer profile for outbound shows how to compare two segments with the same script and keep the one that books more meetings per call attempt.
From ICP to target account list
A target account list is your ICP turned into named companies, sorted by priority. Split it into three tiers so you spend research time where it pays:
- Tier 1: best fit and a current signal, such as a job post or a new manager. Research each account properly and contact more than one person.
- Tier 2: good fit, no known signal. Five minutes of research and the standard cadence.
- Tier 3: possible fit. A lighter cadence, or park them until a signal appears.
How long should the list be? Work backwards from the meetings you want. Gong's averages show why list size and skill matter. With the average rep's numbers in Gong's analysis of more than 300 million cold calls (19 dials per conversation and meetings in 4.6% of conversations), ten meetings take about 217 conversations and roughly 4,100 dials. With the top quarter's numbers (8 dials per conversation and meetings in 16.7% of conversations), ten meetings take about 60 conversations and roughly 480 dials. Your own rates will sit somewhere else; measure them in the first two weeks and recalculate. Our article on how many calls it takes to win one customer walks through the full calculation down to closed deals.
Step 2: data sources and enrichment
Build the company list from a register or a data provider, add the right person and a number that works, and record where every piece of data came from.
Where company data comes from
For companies, start with the official registers. In Belgium, CBE Public Search (KBO Public Search) is free and lets you search by company number, name, address and NACEBEL activity code, up to ten codes per search, filtered by municipality or postcode; each search shows at most 200 results. In the Netherlands, KVK supplies data files from the Handelsregister; companies can shield their address from unsolicited post and door-to-door sales, a separate field you must respect, according to KVK.
Registers give you company facts, rarely people. That is where commercial data providers come in: international ones such as Apollo, Cognism and Lusha, Bizzy, a provider from Ghent, and LinkedIn tools for the people side. What each kind does, and what to check before you buy, is in our comparison of prospecting software.
Finding the right person and number
For each account you want one name, one role and one way to reach them. The usual sources, in order of reliability:
- The company website: team pages, press releases and job posts often name the manager you need.
- LinkedIn: current role and how long they have been in it.
- The switchboard: at smaller companies the general number can be the fastest route. Ask for the person by role ("who handles your field planning?") and write down the name you get.
- A data provider: direct dials and email addresses, with a confidence level and a date. Test a sample before you load a whole file.
A direct number beats a switchboard, and a mobile number beats both for reach, but a mobile number is clearly personal data, so the GDPR section below matters more for it.
Enrichment: what to add, and what to leave out
Enrichment means adding missing fields to a record you already have. Add only what you will use in the next 30 days: role, direct number, work email, company size, a signal and the source. Every extra field costs money, ages quickly and is one more thing you have to justify under the GDPR, which asks you to keep data minimal and accurate.
Three habits keep a list usable:
- Store the source and date per lead ("Bizzy export, 14 October", "trade fair badge scan, 3 September"). You need it to answer "where did you get my number?", which the GDPR obliges you to answer.
- Remove duplicates before you load, by company number or website domain, so two callers never call the same person on the same day.
- Mark bad numbers as invalid instead of deleting the lead, so you can see how good a data source really was.
The GDPR for prospect data
Data about a company is not personal data; a named contact's work email, direct number and LinkedIn profile are. For those you need a legal basis, which for B2B prospecting is usually legitimate interest with a short written balancing test. Buying a list does not give you that basis; you need your own.
Two obligations matter most in day-to-day prospecting:
- Tell people where you got their data. When the data did not come from the person, Article 14 of the GDPR requires you to inform them within a reasonable period and at the latest within one month, or at the latest at your first communication if you use the data to contact them. That includes the source of the data.
- Stop when someone objects. People have a stronger right to object to direct marketing: the controller must stop processing as soon as the objection arrives, as Ireland's Data Protection Commission explains. One no is enough, in every campaign and channel.
The balancing test, retention periods, what to ask a data provider and a checklist before importing are in B2B lead lists and the GDPR. This is general information, not legal advice.
Prospecting rules in Belgium and the Netherlands
Calling and emailing companies is allowed in both countries under conditions, and the conditions differ per country and per channel.
| Channel | Belgium | Netherlands |
|---|---|---|
| Calling a company | Allowed, unless on the Do Not Call Me list or the person objected | Allowed for a BV, NV or other legal entity |
| Calling a sole trader or partnership | Same: check the list | Only with prior consent since 1 July 2026 |
| Commercial email | Prior consent; exceptions for own customers and impersonal company addresses | Prior consent; exception for existing customers |
Belgium. Any Belgian phone subscriber can put a fixed or mobile number on the Do Not Call Me list (Bel-me-niet-meer), companies included, according to the list's own FAQ. Numbers on the list may not be called for sales and must be removed from your call files; the operator updates the list daily and recommends cleaning your files at least every three days. Access works through a paid licence. Existing customers on the list may only be called for direct marketing if they explicitly agreed.
The Netherlands. Since 1 July 2026 you need explicit prior consent to call consumers and small entrepreneurs such as zzp'ers and vof's with a commercial offer, also when they are existing customers, as the ACM announced. KVK lists the personal legal forms concerned: eenmanszaak, vof and maatschap. Companies with legal personality can still be called. That makes the legal form part of your research: check it in the register before you call a Dutch number.
Email. In the Netherlands, unsolicited commercial email is not allowed without prior consent, with an exception for existing customers (KVK); each message must offer a way to unsubscribe and say clearly who is sending, and you must be able to prove consent, according to the ACM. In Belgium, advertising by email also needs prior consent, with a soft opt-in for your own customers and no opt-in for legal entities reached on an impersonal address such as info@, as a Belgian law firm's summary explains. A good phone call is the best moment to ask whether you may send something.
The full picture, with the Belgian opt-in bill, what valid consent looks like and a compliance checklist, is in cold calling rules in Belgium and the Netherlands. This is general information, not legal advice.
Step 3: prospecting methods and when each works
Six methods cover almost all B2B prospecting: phone, email, LinkedIn, events, referrals and signals. Most teams combine three of them in one cadence.
| Method | Best for | Watch out for |
|---|---|---|
| Phone | Fast conversations and qualifying in real time | Calling rules, low connect rates without good numbers |
| Context, a written trace, follow-up after a call | Consent rules and deliverability | |
| Research, familiarity, staying in touch | No automation; slow on its own | |
| Events | Warm first contact with many prospects at once | Follow-up within days or the contact goes cold |
| Referrals | Trust from the first sentence | Small volume; you have to ask |
| Signals | A reason to call now | Signals age fast; check before you mention one |
Phone
The phone gives you a real conversation the moment someone picks up, and lets you qualify and book in the same call. In The Bridge Group's 2025 survey, phone-centric SDR teams averaged 56 dials and 4.6 quality conversations a day, against 28 dials and 3.4 conversations for email-centric teams. The skill gap is large: in Gong's data, top-quartile reps booked meetings in 16.7% of conversations and average reps in 4.6%.
Make the phone work with a prepared list, a short script, fixed call blocks and a next step after every call. Start with the B2B cold call script, opening lines that research supports and the best time to call.
Email gives context and a written trace, and it works better next to calls than instead of them: in Gong's data, prospects who were also called replied to emails at 3.44% against 1.81% for those who were only emailed. Keep prospecting emails short, plain and about the reader, with one question at the end.
Deliverability is part of the job. Google's email sender guidelines ask every sender to set up SPF or DKIM and keep the spam rate reported in Postmaster Tools below 0.3%; senders of more than 5,000 messages a day to Gmail also need DMARC and one-click unsubscribe for marketing messages. For prospecting that means: send from your own mailbox, in small daily volumes, to addresses you checked, and stop at the first sign of complaints. And check the email rules above before the first send.
LinkedIn works best around a call: to research the person before you dial and to stay familiar after a conversation. LinkedIn's Sales Navigator adds advanced search with more than 50 filters, lead and account lists, alerts when a saved lead changes job, and InMail to people you are not connected with.
Do not automate it. Section 8.2 of LinkedIn's User Agreement forbids bots and other unauthorised automated methods to add contacts or send messages, and forbids software that scrapes profiles. Send connection requests yourself, with a line that refers to your conversation. More in LinkedIn and cold calling together.
Events and trade fairs
An event gives you a warm first contact with many prospects in one day, if you prepare it. Before the event, go through the exhibitor and speaker lists, pick your tier-1 accounts and ask for a short meeting at the stand. During the event, write two lines per conversation right away: what they said and what you promised. After the event, follow up within a few working days while people still remember you, by phone first.
Badge scans and business cards are personal data too. Note the source ("trade fair, 3 September") and only email people who agreed to it.
Referrals
A referral is the warmest prospect you can get: someone they trust told them to talk to you. You rarely get one without asking. Ask at a moment when a customer is visibly happy, such as after a successful delivery or a good review meeting, and make it specific: "Who else in your network has the same problem with field planning?" Then ask for an introduction by email instead of just a name, so the prospect expects your call.
Partners work the same way: accountants, consultants or software vendors who serve your ICP and benefit when their customers are helped.
Signals: job posts, new leaders and other triggers
A signal is an event at a company that makes your offer relevant now. It gives you the reason for the call and helps you choose which accounts to call first. Useful B2B signals:
- Job posts for a role your product supports or replaces. A company hiring three sales reps is building a sales team; a company hiring a planner is struggling with planning.
- New leaders: a new sales manager, operations manager or finance director often reviews processes and suppliers in their first months. LinkedIn alerts and press releases show these moves.
- Growth: a new branch or establishment unit, an acquisition, a won tender, a new product line.
- Funding or investment news for companies that raise capital.
- Technology changes: a new CRM, a website relaunch or a job post that names a tool.
- Your own data: a former customer, a lost deal from last year, a prospect who said "call me after the summer".
Use a signal as a reason, not as proof that you were watching them. "I saw you're hiring two planners, so I guess planning is growing faster than the team" sounds human; reading out their LinkedIn activity does not. Check that the signal is still true before you mention it: a job post from three months ago may already be filled.
Step 4: research each account in five minutes
Five minutes per account is enough to find one reason to call and avoid one embarrassing mistake; more than that is usually procrastination for a tier-2 account.
Research in batches before a call block, not between calls. Use the same five steps for every account and write the result in the lead's note, so the next caller sees it too.
| Minute | Look at | Write down |
|---|---|---|
| 1 | The website: what they sell, to whom, how many sites | One line on what the company does |
| 2 | The person on LinkedIn: role, time in role, recent posts | Role and how long they have been in it |
| 3 | Signals: jobs page, news, press releases | The signal, with its date |
| 4 | The register: legal form, size, activity | In the Netherlands, whether you may call without consent |
| 5 | Your own hypothesis | The reason for your call in one sentence, and your opening question |
If minute four shows the company does not fit the ICP, stop and mark it as not a fit; that is also a result. For tier-1 accounts, take fifteen to twenty minutes: read their annual report or recent interviews, find a second and third person to contact, and look for a mutual connection or a customer in the same sector.
What not to do: read every LinkedIn post, prepare a slide deck before the first call, or postpone calling until the research feels complete. The first call is part of the research.
Step 5: a multichannel prospecting cadence
About ten touches over three weeks, with calls as the backbone and email and LinkedIn in between, gives each prospect a fair chance without nagging.
Three findings shape the cadence. RAIN Group puts the average at 8 touches to get a meeting, based on 489 sellers and 488 buyers. In Cognism's 2025 cold calling data, conversations dropped 73% from the first to the second call attempt, and 93% of all conversations happened by the third call and 98.6% by the fifth. And Gong found that calls make emails work better. So: about five calls, with emails and LinkedIn in between, and a clear stop.
| Working day | Channel | What you do |
|---|---|---|
| 1 | Call, then email | First call; if no answer, a short email with the reason for your call |
| 3 | Call | At a different time of day than day 1 |
| 4 | View the profile or follow the company; connect only with a reason | |
| 6 | Call, then email | Second email: one useful insight or example from their sector |
| 10 | Call | Try early morning or late afternoon |
| 12 | A short message if you are connected, otherwise skip | |
| 15 | Call, then email | Last call and a polite closing email that leaves the door open |
Rules that make a cadence work:
- Leave the cadence the moment someone answers. A conversation moves the lead to follow-up with an agreed next step; see sales follow-up.
- Stop on a clear no, log the reason, and never contact the person again in another campaign if they objected.
- Park unreachable leads for a few months after the last touch instead of calling them forever.
- Warm leads skip the cadence. A form, a referral or a reply deserves a call the same day.
The full three-week template, with the email texts and how to tune it, is in sales cadence.
Step 6: messaging per persona
Write one core message per persona: the result they are measured on, the problem in their own words, and a question that is easy to answer.
B2B purchases are more and more often decided by groups instead of one decision maker, as Schmidt, Adamson and Bird wrote in Harvard Business Review. At larger accounts that means you contact two or three people, each with a message that fits their role, and you help the first person you reach to involve the others.
| Persona | Cares about | Opening angle |
|---|---|---|
| Business owner or managing director | Growth, cash, time, risk | What similar companies in their sector and region did |
| Sales manager | Pipeline, team activity, new hires getting up to speed | Meetings per week and seeing where the team loses time |
| Finance director | Cost, payback, predictability | Cost per result and contract terms |
| Operations manager | Errors, delays, capacity | The steps that go wrong today |
| HR manager | Hiring, retention, onboarding | The job posts you saw |
| IT manager | Security, integration, where data is stored | Effort to connect and data location |
A structure for every message: reason, relevance, request
- Reason: why them and why now. The signal from your research, or the sector they are in.
- Relevance: one sentence on the problem you solve or the result similar companies get, without superlatives.
- Request: a small question they can answer in one line, not a request for 30 minutes of their time.
An example first email from a fictional planning software vendor to an operations manager, written for this guide:
Subject: planning at your new Genk site
Hi Sarah, I saw you're opening a second site in Genk and hiring two planners. When installation companies add a second site, planning often moves to spreadsheets and phone calls between the sites. Is that something you're working on this quarter, or is it already covered?
Short, specific, one question, no attachment. The same structure works for a call opener: say who you are, give the reason in one sentence and ask a question. For the call itself, see cold call opening lines, SPIN questions on a cold call and how to answer objections. How buyers decide, and why reaching them early matters, is in how B2B buyers buy.
From first conversation to booked meeting
The goal of a prospecting call is not to sell but to find out whether a meeting is worth both your time, and if so, to book it before you hang up.
Four things decide whether a conversation earns a meeting. Find them out with questions, not with a pitch:
- Problem: do they have the problem you solve, in their own words? "How do you handle planning across the two sites today?"
- Timing: is it on their list for the coming months, or is something else first? "Is this something you want to fix this year?"
- People: who else is involved in a decision like this? "Who would you want in a first conversation?"
- Next step: are they willing to put a date in the calendar now? "I have Tuesday at 10 or Thursday at 2; which suits you?"
If the answer to the first question is no, thank them, ask whether you may check back at a later moment, log the reason and move on. That reason is valuable data: if most people in a segment say the same thing, the segment or the message is wrong, not the caller.
When the answers are yes, book the meeting while they are on the line: offer two concrete moments, send the invitation during the call and confirm what the meeting will cover. A meeting booked "next week, I will send you an email" often never happens. See how to book the meeting while the prospect is still on the line, how to ask for the meeting and what counts as a qualified meeting.
Receptionists and voicemail
At many companies the first person you reach is a receptionist or an assistant. Treat them as a guide, not an obstacle: say who you are, ask who handles the topic and whether that person is available, and write down the name and the best time to call back. Do not pretend to know the person or invent a reason for the call; it rarely works and it breaks trust before you start.
On voicemail, either hang up and try at a different time, or leave one short message with your name, one reason and your number, and say you will also send an email. A second message in the same cadence is enough; more turns into noise.
Prospecting as a founder, a sales team or an agency
The method stays the same, but the constraints differ: a founder lacks time, a sales team needs consistency, and an agency needs separation per client.
- Founder or business owner. You know the product and the customer better than anyone, which makes your calls convincing, but delivery always wins the fight for your calendar. Block at least three call blocks a week, start with your best segment and a list of 100 to 200 accounts, and track only attempts, conversations and meetings. Our article on founder-led sales covers when to hire the first salesperson.
- Sales team with SDRs and account executives. The risk is that every caller works differently. Agree on one definition of each outcome, one script per campaign, one cadence and one weekly review, and let the SDR book meetings in the account executive's calendar. See how to build an outbound sales team and SDR KPIs and benchmarks.
- Appointment setting agency. You prospect on behalf of clients, so each client needs its own campaign, script and report, and callers should see only the leads they work on. Clients want to see the funnel and the reasons prospects said no, not just a count of meetings; see the appointment setting report template.
Step 7: prospecting metrics and benchmarks
Measure the funnel step by step, with the same denominators every week: attempts, conversations, meetings booked, meetings held and opportunities.
| Metric | Formula | What it tells you |
|---|---|---|
| Connect rate | Conversations ÷ call attempts | List quality, numbers, calling times |
| Conversation-to-meeting rate | Meetings booked ÷ conversations | Message, script and skill |
| Show rate | Meetings held ÷ meetings booked | Qualification and confirmation |
| Email reply rate | Replies ÷ emails delivered | Relevance and deliverability |
| Touches per meeting | All touches ÷ meetings booked | Cadence efficiency |
| Meetings per caller per week | Meetings booked ÷ callers | Output against goal |
Benchmarks help you see whether a number is far off, but none of the figures below was measured in Belgium or the Netherlands, and each uses its own definitions. Check the denominator before you compare.
| Benchmark | Value | Source and denominator |
|---|---|---|
| Connect rate, average and top-quartile rep | 5.4% and 13.3% | Gong 2024, calls answered by the prospect ÷ dials |
| Dials per conversation, average and top-quartile rep | 19 and 8 | Gong 2024 |
| Meeting-set rate, average and top-quartile rep | 4.6% and 16.7% | Gong 2024, meetings ÷ conversations |
| Meetings per conversation in WHAM's 2024 data | 4.82% | Cognism 2025, meetings booked ÷ conversations |
| Conversations reached by the third and fifth attempt | 93% and 98.6% | Cognism 2025, share of all conversations |
| Email reply rate with and without a call | 3.44% and 1.81% | Gong 2024, replies ÷ emails sent |
| Daily activities of the median SDR | 112 | The Bridge Group 2025, 351 companies, 78% North American, 83% B2B SaaS |
| Quality conversations per SDR per day | 4.1 (4.6 phone-centric, 3.4 email-centric) | The Bridge Group 2025 |
| Monthly SDR quota, median | 10 held first meetings | The Bridge Group 2025 |
| Touches to get a meeting | 8 on average | RAIN Group, 489 sellers and 488 buyers |
A worked example with made-up but realistic numbers: one caller makes 240 call attempts a week. At a connect rate of 10% that is 24 conversations; at a conversation-to-meeting rate of 12%, about 3 meetings a week. To get to 5 meetings, the caller can call more (400 attempts), improve the list so more people pick up (17% connect rate), or improve the message (21% of conversations). The third is usually the cheapest, and the reasons people give for "not interested" tell you where to start.
Definitions and formulas for every metric are in cold calling KPIs, more datasets side by side in cold calling benchmarks, and the wider set of numbers a sales manager runs in our sales KPI guide. Meetings that do not happen cost as much as meetings never booked; see how to reduce no-shows and what counts as a qualified meeting.
The weekly prospecting routine and call blocks
Protect two call blocks of 60 to 90 minutes a day, prepare the list before each block, and review the numbers once a week.
Prospecting loses to everything else unless it has fixed time in the calendar. A call block is a fixed slot with the list ready, notifications off and admin after the block; our article on call blocks explains why focused sessions beat calling in between other work. For timing, Cognism's 2025 data found the most meetings booked on Tuesday and the best slots at 10 to 11 am, with 2 to 3 pm as runner-up; other studies disagree on the details, so test it on your list (see the best time to make cold calls).
| Day | Morning | Afternoon |
|---|---|---|
| Monday | Weekly review (30 minutes), research tier-1 accounts | Call block, follow-up emails |
| Tuesday | Research batch, call block 10:00 to 11:30 | Call block 14:00 to 15:30, follow-up |
| Wednesday | Research batch, call block | Call block, LinkedIn after conversations |
| Thursday | Research batch, call block | Call block, book and confirm meetings |
| Friday | Short call block, follow-up | List building for next week, admin |
Inside each block, keep the same rhythm: five minutes to open the list and read your notes, then call lead by lead, log the outcome right after each call, and send promised emails at the end of the block. A founder who also delivers the work can start with three blocks a week and keep them as fixed as a customer meeting.
Once a week, look at the funnel per campaign and change one thing at a time: the list, the time of day, the opening or the channel mix. Changing everything at once tells you nothing.
Prospecting tools by category
Prospecting tools fall into six kinds; a small team needs a list source, a phone, a place to work the list and a CRM, and adds the rest when volume grows.
| Kind of tool | Job | Examples |
|---|---|---|
| Data and contact providers | Companies, people, numbers, emails, signals | Apollo, Cognism, Lusha, Kaspr, Dropcontact, Bizzy |
| Sales engagement and sequencers | Automated email steps and task queues | Outreach, lemlist, HubSpot Sales Hub, Apollo |
| LinkedIn tools | Search, lists, alerts and InMail | LinkedIn Sales Navigator |
| Dialers | Placing calls faster: power or parallel dialling | Aircall, Orum, Apollo |
| CRMs | The record of customers and deals | Attio, HubSpot, Pipedrive, Teamleader |
| Calling workspaces | The caller's screen: list, script, outcome, follow-up, numbers | Ringlane |
The names are examples from the vendors' own descriptions on 29 October 2026, not recommendations. What each kind does well, what to check for Belgium and the Netherlands, and which stack fits which team size are in prospecting software: 6 kinds of tools compared. For the calling layer only, see cold calling software.
Before you buy anything, a spreadsheet is enough for one caller with one list. Our free cold call tracker template for Excel and Google Sheets has the columns, and the article gives the formulas; you outgrow it when several people call the same list or when follow-ups start slipping.
Once the list is longer than you can call in a week, decide who comes first. Our guide to lead scoring for a cold call list gives a simple points table that works without marketing data.
A 30-day prospecting plan
In 30 days you can go from no system to a measured campaign: one week of preparation, two weeks of calling, and one week to review and decide.
Days 1 to 5: foundations
- List your ten to twenty best customers and write the ICP in the template above.
- Pick one segment to start with. One segment, one script, so the numbers mean something.
- Build a list of 150 to 300 accounts from a register or data provider, with source and date per lead.
- Check the rules: Do Not Call Me list for Belgian numbers, legal form for Dutch ones, and your legitimate interest note.
- Write a short script, three emails and a LinkedIn note, using reason, relevance and request.
- Set a goal in meetings for the month and put the call blocks in your calendar.
Days 6 to 15: first calls
- Research in batches of 20 accounts before each block, five minutes each.
- Start the cadence for the first half of the list; add the second half in the second week.
- Log every outcome right after the call, with the reason for every "not interested".
- Midway through, check the connect rate. Very low? Check the numbers and try other times of day before you blame the script.
Days 16 to 25: tune
- Finish the cadences; park unreachable leads with a date.
- Pick the most frequent objection and write a better answer; practise it in a short role-play.
- Change one thing at a time: the opening, the time slot or the email.
Days 26 to 30: review and decide
- Calculate the funnel: attempts, conversations, meetings booked, meetings held.
- Read the reasons for "not interested": wrong segment, wrong person or wrong moment?
- Decide: keep the segment and scale the list, change the message, or test a second segment.
- Write down what worked in a one-page playbook, so the next caller starts where you stopped. See how to build a sales playbook.
Prospecting checklists
Use these checklists at the moments where most prospecting goes wrong: before the list, before a call block, after a call and at the weekly review.
Before you build or load a list
- The ICP is written down, with exclusions.
- Every lead has a source and a date.
- Duplicates are removed by company number or domain.
- Belgian numbers are checked against the Do Not Call Me list; Dutch sole traders and partnerships are only called with consent.
- Your legitimate interest note is written, and you know how you inform people where you got their data.
- People who objected before are excluded from every campaign.
Before each call block
- The list for this block is ready and researched.
- Script, objection answers and calendar are open.
- Notifications are off; the block is in your calendar.
- You know your goal for the block, in conversations or meetings.
After each call
- The outcome is logged: not reached, conversation, call back, meeting, not interested or invalid number.
- There is a dated next step, or the lead is closed with a reason.
- Promised emails go out the same day.
- A booked meeting has an invitation and a short agenda.
Weekly review
- The funnel per campaign and per caller, compared with last week.
- The top three reasons for "not interested".
- Overdue follow-ups: zero, or a plan to get there.
- One change for next week, written down.
Common prospecting mistakes
Most prospecting fails on a few predictable mistakes, not on a lack of tools.
- A list that is too broad. "All SMEs in Flanders" is not an ICP. Narrow segments give you sharper messages and comparable numbers.
- Stopping after one attempt. In Cognism's data the second and third calls still produced a large share of all conversations; 93% were only reached by the third attempt. One try per lead wastes the list.
- Calling forever. The opposite mistake: twenty attempts annoy people and hide the fact that the segment does not work.
- Pitching instead of asking. The first call is about whether there is a problem worth a meeting, not about every feature.
- No next step. A conversation without a dated follow-up is a lead you will lose.
- Measuring only meetings. Without attempts and conversations you cannot tell whether the list, the timing or the message is the problem.
- Ignoring the rules. Checking the Do Not Call Me list and the legal form takes minutes; a complaint or an investigation takes far longer. Check before you call.
Where Ringlane fits
Ringlane is the calling workspace for steps 5 to 7: callers work from one screen with the lead, the script and the answers to objections, log every call with one key (not reached, conversation, call back, meeting, not interested, invalid number), and Ringlane plans the next step. The Today view puts overdue call-backs first, meetings are booked in Google Calendar with a Google Meet link while the prospect is on the line, and the reports show attempts, connect rate, conversations and meetings, on Plus per caller and campaign with the reasons prospects said no. Ringlane is not a dialer and not a data provider: you call with your own phone or softphone and import your own list from Excel, CSV or a Bizzy export. On Plus and Pro you call through your softphone in one click, and on Pro a report shows the best time to call per weekday and hour; a compliance pack with a check against the Do Not Call Me list is in development. See the roadmap, the interactive demo and the plans, from a free plan for one caller.
Frequently asked questions
What is prospecting in sales?
What is B2B prospecting?
What is the difference between prospecting and lead generation?
What are the best B2B prospecting methods?
How many touches does it take to book a meeting?
How much time should a salesperson spend prospecting?
What is a good connect rate for cold calls?
Is cold calling still effective for prospecting?
Is B2B prospecting legal under the GDPR?
What is an ideal customer profile in prospecting?
What is a prospecting cadence?
Is there a free sales prospecting Excel template?
Sources
- Gong Labs: The hidden power of cold calling, insights from 300M calls (18 July 2024)
- The Bridge Group: SDR Models, Motions and Metrics, 2025 research report (6 February 2025)
- Cognism: The State of Cold Calling in 2025 (call data from WHAM)
- RAIN Group: 4 essential elements of a winning prospecting strategy (updated 24 July 2024)
- Harvard Business Review: Making the Consensus Sale (Schmidt, Adamson and Bird, March 2015)
- Regulation (EU) 2016/679 (GDPR), Article 14, text as adopted (legislation.gov.uk)
- Data Protection Commission (Ireland): The right to object (Article 21 GDPR)
- Do Not Call Me vzw: information for telemarketers (in Dutch)
- Do Not Call Me vzw: frequently asked questions (in Dutch)
- ACM: Vanaf 1 juli strengere regels voor telemarketing (25 June 2026, in Dutch)
- KVK: Direct marketing en regelgeving (updated 10 August 2026, in Dutch)
- ACM: Veelgestelde vragen over het versturen van e-mailberichten (in Dutch)
- Lexgo, Nicolas Roland (Younity): Email marketing, a kind reminder of what you need to consider (30 May 2017)
- FPS Economy: CBE Public Search
- Google Workspace Admin Help: Email sender guidelines
- LinkedIn: User Agreement, effective 3 November 2025 (section 8.2)
- LinkedIn: Sales Navigator product page