Topic

B2B cold calling: the complete guide for 2026 (numbers, scripts, objections, rules)

In short

B2B cold calling is phoning a company that did not ask to hear from you, to earn a next step, usually a short meeting. It works at small rates: in Gong's data on 300M+ calls the average rep reached the prospect on 5.4% of dials and booked a meeting in 4.6% of conversations, about 400 dials per meeting, while the top quarter needed about 45. This guide covers every step from list to held meeting, with the Belgian and Dutch rules and a 30-day plan.

What B2B cold calling is, and what it is not

B2B cold calling is phoning a company that did not ask to hear from you, to start a sales conversation with the person who owns a problem you can solve. The aim of the call is almost never to sell on the phone. It is to earn a next step: usually a meeting of 20 to 30 minutes, sometimes a call-back with the right person, and sometimes a clear no that saves both sides time.

This guide is written for founders who call themselves, sales development reps and appointment setters, calling agencies and the sales managers who run them. It focuses on B2B in Belgium and the Netherlands, because that is where we work, but almost everything applies wherever you call.

Cold, warm and follow-up calls

A cold call goes to someone with no prior contact. A warm call goes to someone who already showed interest, for example by downloading something or meeting you at an event. A follow-up call continues a conversation you already had. Together they form telephone prospecting. The skills overlap, but the odds are very different, so measure them separately.

If you sell into Belgium and the Netherlands, you will hear three words for the same work. The Dutch say koude acquisitie or koud bellen, Flemish companies usually say prospectie or prospecteren (the Flemish public employment service VDAB runs workshops on telephone prospecting under that name), and many teams in both countries simply say cold calling. This guide also exists in Dutch; use the language switch at the top of the page.

The goal of a cold call is the next step

Most of the advice in this guide follows from one idea: a cold call is a short conversation with one goal, decided before you dial. When the goal is a meeting, everything else serves it. The opener earns 30 seconds, the questions show whether there is a fit, the value statement gives a reason to meet, and the close books a time. If you need appointment setting in its wider sense, from qualification to handover, that topic has its own guide.

How to use this guide

Read it once from top to bottom, then come back to the chapter you need. Every chapter ends with links to a Ringlane article that goes deeper, with its own sources. The numbers in this guide come from published research that we opened and checked; each one carries its source and its denominator, because a rate without a denominator cannot be compared with anything.

Does cold calling still work in 2026?

Yes, but only at small rates and only when the call is relevant to the person who picks up. Both halves of that sentence are backed by research.

Buyers still take meetings from outreach. In a RAIN Group study of 488 buyers and 489 sellers, 82% of buyers said they accept meetings with sellers who reach out proactively, and 54% said the seller behind their most recent meeting had connected with them by phone. That study dates from 2018, so read it as evidence that the phone works, not as a 2026 market share.

Buyers also punish irrelevant outreach. In a Gartner survey of 632 B2B buyers published in June 2025, 61% said they prefer a buying experience without a sales rep, and 73% said they actively avoid suppliers who send irrelevant outreach.

The call data sits between those two. In Gong's analysis of more than 300 million cold calls, the average rep reached the prospect on 5.4% of dials and booked a meeting in 4.6% of conversations, while the top quarter of reps reached 13.3% and booked 16.7%. The channel is the same for both groups. What differs is the list, the timing and the skill, which is exactly what the rest of this guide is about.

So the honest answer to "is cold calling dead?" is: generic cold calling is, relevant cold calling is not. Our article is cold calling dead? puts the buyer research and the call data side by side, and how B2B buyers buy today explains what changed on the other end of the line.

The numbers: what to expect per 100 dials

Expect most dials to end without a conversation and most conversations to end without a meeting. With the average rates in Gong's data, it takes about 400 dials to book one meeting. With top-quarter rates, it takes about 45. Knowing where you are between those two is the first job of any calling team.

Five rates, five denominators

Cold calling numbers are only comparable when they are divided by the same thing. These are the five that matter, in the order a lead moves through them:

  1. Connect rate: dials where the right person answered, divided by all dials.
  2. Conversation rate: connects that became a real conversation (not a hang-up in the first seconds), divided by connects.
  3. Meeting rate: meetings booked, divided by conversations.
  4. Show rate: meetings that took place, divided by meetings booked.
  5. Close rate: deals won, divided by meetings held.

Vendors often publish a "success rate" without saying which of these it is. A 5% success rate per dial and a 5% success rate per conversation describe teams that are ten or twenty times apart, so always ask for the denominator before you compare.

The public benchmarks

These are the most useful public benchmarks we found. Most of the data comes from US and UK teams selling software, so treat them as a range, not a target.

NumberValueDivided bySource
Connect rate5.4% average, 13.3% top quarterDialsGong, 300M+ calls, 2024
Meeting rate4.6% average, 16.7% top quarterConversationsGong, 2024
Conversations within three attempts93% (98.6% within five)All conversationsCognism, 2025
Average call lengthAbout 93 seconds (about 83 in 2024)Per callCognism, 2025
Dials per day56 on phone-centric teams, 28 on email-centric teamsPer SDR per dayThe Bridge Group, 351 companies, 2025
Quality conversations per day4.1 median (4.6 on phone-centric teams)Per SDR per dayThe Bridge Group, 2025
Monthly quota10 held meetings (median); 60% of SDRs at quotaPer SDR per monthThe Bridge Group, 2025

All rates, timings and attempt curves are explained in more detail in cold calling benchmarks.

Work backwards from your goal: a worked example

The formula is simple: dials per meeting = 1 ÷ (connect rate × meeting rate). With Gong's averages that is 1 ÷ (0.054 × 0.046), about 403 dials. With the top-quarter rates it is 1 ÷ (0.133 × 0.167), about 45. Gong's own example lands in the same place: at 800 dials a month, the average rep books about 2 meetings and a top-quarter rep about 18.

The table shows how many dials one meeting takes at other combinations. Find your row, then see what improving one rate does.

Connect rateMeeting rate 5%Meeting rate 10%Meeting rate 15%
5%400 dials200 dials133 dials
10%200 dials100 dials67 dials
15%133 dials67 dials44 dials

Now a worked example you can redo with your own numbers. The figures are invented for the example, not a benchmark. A founder of a small IT services company in Ghent wants six new held meetings a month. She calls for four weeks and logs every outcome:

  • 400 dials and 48 conversations: one conversation for every 8.3 dials, or 12% of dials.
  • 4 meetings booked: 8.3% of conversations.
  • 3 meetings held: a 75% show rate.

Her own number is 400 ÷ 3, about 133 dials per held meeting. Six held meetings a month therefore need about 800 dials, or 40 a working day over 20 days. If she gets her meeting rate from 8.3% to 12% with a better opener and ask, the same 800 dials give about 8.6 held meetings (800 × 0.12 × 0.12 × 0.75), and she can reach her goal of six with about 560 dials. That is the lesson of almost every calling funnel: improving one step by a few points saves hundreds of dials. Our article on how many calls it takes to get one customer extends the same math to signed deals and weekly targets.

Three mistakes when reading benchmarks

  • Mixing denominators. A "2% success rate" per dial is good; per conversation it is poor.
  • Comparing markets. A SaaS team calling US mobiles and a Flemish installer calling switchboards in Limburg will never have the same connect rate. Compare yourself with your own last four to six weeks.
  • Judging too early. At a 5% meeting rate, 20 conversations tell you almost nothing. Wait for at least 100 conversations before you call a script a failure.

Before you dial: the target and the list

The list decides more than the script. A good caller with a poor list books fewer meetings than an average caller with a list of companies that clearly have the problem you solve. Spend the first hours of a campaign on the list, not on the pitch.

One segment per campaign

Pick one segment per campaign: one sector, one company size, one region and one role. A campaign called "Flemish accountancy firms with 10 to 50 staff, call the managing partner" gives you a script that fits and numbers you can read. A campaign called "SMEs in Belgium" gives you neither. Use your ideal customer profile to choose, and treat each campaign as a test of that profile.

Write one angle per segment: the problem this kind of company has, in the words they would use, and one reason to call them now. Reasons to call now are things you can see from the outside: a new branch, a job posting for the role your product supports, a recent merger, a change in regulation that hits their sector.

Who to ask for

Ask for the person who owns the problem, not the most senior name you can find. In a company of 20 people that is often the owner or managing director. In a company of 500 it is usually a head of department. If you are not sure, call to find out who it is: "Who decides on how your service visits are planned?" is a fine first call and often gets you a name, a direct line and a better time to call.

Building the list in Belgium and the Netherlands

Both countries have public company registers. In Belgium, the free CBE Public Search of the FPS Economy shows a company's enterprise number, legal form, address, contact details and activity codes (NACEBEL). In the Netherlands, the KVK trade register does the same. Belgian data providers such as Bizzy build lists on top of these registers.

Two checks matter more than the size of the list:

  • Legal form. In the Netherlands it decides whether you may call at all, see the rules below. Keep the legal form as a column in your list.
  • Personal data. As soon as a list holds a name, a direct number or a job title, the GDPR applies to it. KVK points out that this is also true for data taken from its own register. Our guide on B2B lead lists and the GDPR covers buying, enriching and storing lists.

Prefer direct lines and mobile business numbers over the switchboard where you have them legally, and note where each number came from. You will need that source in the first seconds of the call in Belgium (see what to say at the start).

How many leads you need

Since most conversations happen within the first three to five attempts (more on that in timing), a lead is "used up" after about four dials. That gives a second formula: leads needed = dials needed ÷ attempts per lead. The founder in Ghent needs about 800 dials a month; at four attempts per lead that is about 200 fresh leads a month, or roughly 50 a week. If your segment only has 300 companies in it, you will run out in six weeks, which is a reason to widen the segment or to plan a second campaign now.

Two minutes of research per call

For each lead, look at the company website and the person's LinkedIn profile for about two minutes before you dial, and write down one thing you can use: a project, a vacancy, a recent post. More than that is rarely worth it at volume; less often means a generic opener. Our article on LinkedIn and cold calling shows what to look for and what not to automate.

The rules: who you may call in Belgium, the Netherlands and beyond

Calling businesses is allowed in both Belgium and the Netherlands, but the starting point differs. The Netherlands works with prior consent for consumers and small businesses without legal personality. Belgium works with a do-not-call list that covers business numbers too. The GDPR applies on top of both. This chapter is general information, not legal advice; the full version, with every legal source, is our article on cold calling rules in Belgium and the Netherlands.

Who you callNetherlandsBelgium
Companies with legal personality (BV, NV and similar)Allowed without prior consentAllowed, unless the number is on the Do Not Call Me list or the company objected to you
Sole traders and partnerships (eenmanszaak, vof, cv, maatschap)Only with prior consent, since 1 July 2026 also for existing customersSame as above: check the list and your own objections
ConsumersOnly with prior consentAllowed unless on the list or objected
The person you speak toGDPR applies to their personal dataGDPR applies to their personal data

The Netherlands: legal form decides

Since 1 July 2026, companies may only make sales calls to consumers and small entrepreneurs if they gave prior, explicit consent, and that now includes existing and former customers, according to the regulator ACM. Only charities, charity lotteries and publishers of newspapers and magazines keep an exception for their own customers. Business.gov.nl confirms that you may still call companies with legal personality for sales purposes, while sole proprietors, general partnerships, limited partnerships and professional partnerships need to have given consent first.

In practice: split every Dutch list by legal form before the first dial. A freelancer trading through their own BV may be called; the same freelancer as an eenmanszaak may not, unless they said yes beforehand.

Belgium: the Do Not Call Me list covers businesses too

In Belgium you may call unless the number is on the "Do Not Call Me" list (Bel-me-niet-meer) or the person objected to you directly. The FPS Economy guidelines of 9 February 2026 say the protection covers every Belgian telephone subscriber, whether a consumer, a company or a non-profit, and advise keeping written, dated proof that you checked the list and your own objection lists. Fines can reach €100,000 or 4% of annual turnover, whichever is higher.

To check numbers you need a licence from Do Not Call Me vzw. The list gets a daily update, and the organisation recommends updating your call files at least every three days. Belgian bills that would move consumer calls to opt-in were pending in parliament; when our rules article was last checked on 20 October 2026, none had been adopted, so check the status before each new campaign.

The GDPR: legitimate interest, source and objection

Telecom rules decide whether you may call. The GDPR governs the personal data behind the call. If you rely on legitimate interest as your legal basis, as many B2B callers do, write down before the campaign why the call is necessary and why it does not override the person's interests. Two articles of the GDPR shape the call itself:

  • Article 14: if you did not get the data from the person, you must tell them where it came from, at the latest at your first contact.
  • Article 21: a person can object to direct marketing at any time, you must then stop, and you must mention this right at the latest in your first contact.

What to say at the start of the call

The rules translate into the first two sentences of your call. In the Netherlands, Business.gov.nl says you give your name and the company you call for, say that you are calling for sales purposes, show your number and stay reachable on it, and announce any recording at the start. In Belgium, the Data Protection Authority's recommendation 01/2025 on direct marketing says the caller should name, before anything else, the company responsible, the purpose, the source of the data and the person's rights, including the unconditional right to object. The rest can follow in layers, for example a text message with a link to your privacy notice.

That sounds like a lot for an opener, but it fits in two sentences. You will find compliant openers in the openers chapter.

Email, text messages and WhatsApp after the call

Follow-up by email or text message has stricter rules than a call. Under Article 13 of the ePrivacy Directive, direct marketing by electronic mail (which includes text messages) to individuals needs prior consent, with a narrow exception for existing customers. In the Netherlands, KVK says unsolicited commercial digital messages are not allowed, except to people who are or were your customers. The practical answer: ask on the call whether you may send something, and note the yes.

Robocalls and AI voice agents

A call made by a person and a call made by a machine are different legal categories. The same Article 13 requires prior consent for automated calling systems without human intervention when you call individuals, and the EU AI Act (Article 50) requires AI systems that talk to people to be designed so that those people know they are dealing with an AI. Before you let an AI voice agent make outbound sales calls, get legal advice for every country you call.

Calling outside the Benelux

Each country has its own rules, so check before you add a market. Two examples. In the UK, the ICO says B2B sales calls must be screened against both the TPS and the Corporate TPS. In Germany, § 7 of the UWG treats a sales call to a business without at least its presumed consent as unacceptable harassment, which makes cold calling German companies much riskier than calling Belgian or Dutch ones.

When to call, and how often

Start with late morning and early afternoon from Tuesday to Thursday, make three to five attempts per lead at different times of day, and then let your own data take over. The studies agree on the broad pattern and disagree on the details, so the only reliable answer is the one you measure on your own list.

Time of day and day of the week

In Cognism's 2025 data, calls lasted longest between 10 and 11 am, with 2 to 3 pm as the runner-up, and call length dipped from 7 to 9 am, around noon and at 5 pm. Tuesday had the most booked meetings. Friday was one of the worst days for bookings but one of the best for conversations. Other datasets point to different hours, which our article on the best time to cold call compares in detail.

Think about your prospects' day before you trust any study. A site manager in construction is on site at 10 am and at his desk at 7.30; a managing partner of an accountancy firm may be easier to reach at 5 pm than at 10. Call in the prospect's local time, and skip the lunch hour: Cognism also saw call length dip around noon.

How many attempts

Make three to five attempts per lead before you stop. Cognism found that conversations drop by 73% from the first to the second attempt and by another 60% from the second to the third, but that three attempts still capture 93% of all conversations and five capture 98.6%. A sixth or seventh attempt is mostly wasted time that would earn more on a fresh lead.

Spread the attempts. Two attempts on the same morning reach the same person in the same meeting. One attempt in the morning, the next a day later in the afternoon and the third early the next week gives you three different chances.

An attempt rhythm you can copy

AttemptWhenIf no answer
1Day 1, late morningNo voicemail yet; plan attempt 2
2Day 2, afternoonShort voicemail plus a short email (see voicemail and email)
3Day 5, early morning or late afternoonConnection request on LinkedIn, no pitch
4Day 9, late morningLast email that closes the loop
5 (optional)Day 14, a time you have not triedPark the lead for three months, or stop

In Ringlane this rhythm largely runs by itself: after No answer the lead comes back the next working day at a different time than today, and after four attempts (the default, which an owner or admin can change) it becomes Unreachable and leaves the call block. See the six outcomes in the Academy.

The local calendar

Plan campaigns around the calendar of the people you call. Summer holidays, the weeks around Christmas and long weekends (in Belgium and the Netherlands, Ascension and Whit Monday) give you lower connect rates whatever you do. Use those weeks for list building, script work and follow-up emails, and call hard in the weeks before and after.

On Pro, a report in Ringlane shows the best time to call per weekday and hour, built from your own outcomes (see reports and dashboards). Without Pro, split one list into a morning campaign and an afternoon campaign and compare the connect rates after a few weeks.

The first 30 seconds: openers that hold

A good opener says who you are, why you are calling this person, and asks for a short moment, in that order and in under 20 seconds. The prospect decides in those seconds whether to give you the next minute, and in Cognism's data the average call only lasts about 93 seconds in total.

The four parts of an opener

  1. Who you are. First name, company. No title, no tagline.
  2. Why this person. The trigger or the reason you picked their company: a vacancy, a new site, the sector you work in.
  3. Honesty about the interruption. Say it is a sales call; in the Netherlands you have to anyway.
  4. A question that hands back control. Ask for 30 seconds, then let them decide.

Four opener models

Gong compared openers in its 300-million-call dataset and found that the ones leading with context did best: "Heard the name tossed around?" scored 11.24% and a permission-based opener 11.18%, against 7.6% for "How's your day going?" and 2.15% for "Did I catch you at a bad time?" (Gong, July 2024). Gong does not define success in that article, so use the ranking, not the percentages. These four models, in our words, follow that pattern:

ModelExampleUse it when
The trigger opener"Hi Sarah, this is Tom from Fieldwise. I saw you're hiring two service technicians in Antwerp. That's usually when planning starts to hurt, which is why I'm calling. Can I take 30 seconds to explain, and you tell me if it's relevant?"You have a real, visible reason for calling now.
The honest permission opener"Hi Sarah, Tom from Fieldwise. This is a sales call, I'll be quick. Can I tell you in 30 seconds why I picked you, and then you decide if we keep talking?"You have no trigger but a clear fit.
The peer opener"Hi Sarah, Tom from Fieldwise. We work with a few installation companies in Flanders on how they plan service visits. Have you heard of us?"You really do work with comparable companies (never invent them).
The problem-question opener"Hi Sarah, Tom from Fieldwise. Quick question to see if I'm calling the right person: are you the one who deals with technicians running late on service visits?"The role is clear but you are unsure you have the right person.

Fieldwise and the people in these examples are fictional. Replace the trigger, the region and the problem with your own.

Openers that also meet the rules

In Belgium and the Netherlands an opener has two extra jobs: say that it is a sales call (the Netherlands) and name the source of the data and the right to object (the Belgian DPA's recommendation). Done well, this makes the opener more honest, not longer. An example for a Belgian call:

"Good morning Mr Peeters, this is Tom from Fieldwise in Ghent. This is a sales call about planning service visits. I found your number on your website. If you'd rather not be called by us, just say so and we won't call again. Can I take 30 seconds to explain why I'm calling you?"

That is about 55 words, roughly 20 seconds at a calm pace. Our article on cold call opening lines has more examples and the full Gong data.

Lines to drop

  • "Did I catch you at a bad time?" It scored lowest in Gong's data and invites the easiest no there is.
  • "How are you today?" from a stranger sounds like a script. Ask it only if you mean it, and wait for the answer.
  • A company pitch before the reason. "We are a leading provider of..." tells the prospect nothing about why you called them.
  • Pretending to know someone or to be returning a call. Apart from being dishonest, hiding the commercial purpose breaks the Dutch and Belgian rules.

How to test an opener

Test one opener at a time, and measure it on something that happens often enough to count. Meetings are too rare: at a 5% meeting rate you need hundreds of conversations to see a real difference. Measure instead the share of conversations that get past the first minute, or the share where the prospect answers your first question. Run each version for at least 50 conversations, keep everything else the same, and keep the winner.

Anatomy of a cold call that books a meeting

A cold call that books a meeting has six moves: open, give the reason, ask about the problem, give one sentence of value, ask for the meeting, and confirm the details. Each move is one or two sentences. The prospect should talk more than you after the first 30 seconds.

The six moves

MoveGoalLength
1. OpenWho you are, that it is a sales call, permission15 to 20 seconds
2. ReasonWhy this company, why nowOne sentence
3. Problem questionFind out whether the problem exists hereOne question, then listen
4. ValueOne sentence that links their answer to what you doOne or two sentences
5. AskA short meeting with a clear goal, two time slotsOne sentence
6. ConfirmEmail address, invitation, who joins30 seconds

Put these six moves in your cold calling script as blocks, not as a text to read aloud. The script article has a template to copy and a version per persona.

An annotated example call

The call below is invented to show the moves. Tom sells planning software for service technicians (fictional) and calls the operations manager of an installation company.

Tom: "Hi Sarah, this is Tom from Fieldwise. This is a sales call, I'll be quick. I saw you're hiring two service technicians. Can I take 30 seconds to tell you why I'm calling?" (Move 1 and 2: identity, purpose, trigger, permission.)

Sarah: "Thirty seconds."

Tom: "Thanks. When installers grow from ten to fifteen technicians, planning usually moves from one person's head to a spreadsheet, and that's where late visits start. How do you plan your visits today?" (Move 3: a pattern, then an open question.)

Sarah: "Our planner does it in Excel. It works, mostly. The problem is emergencies; then the whole day shifts."

Tom: "What happens to the other customers that day?" (A follow-up question on her words, not a pitch.)

Sarah: "Someone calls them all to move their visit. Takes half a morning."

Tom: "That half morning is exactly what we work on: when an emergency comes in, the planning shifts and the customers get a message by themselves. I won't explain it on the phone. Would 20 minutes with your planner make sense, to see whether it fits your Excel way of working? I have Tuesday at 10 or Thursday at 2." (Move 4 and 5: value in her words, a small ask, two slots.)

Sarah: "Thursday. Send it to me, I'll forward it."

Tom: "I'll send the invitation now to sarah@... is that right? And what's your planner's name, so I can add him?" (Move 6: confirm while still on the line.)

Notice what Tom does not do: he does not list features, he does not ask "are you interested?", and he does not argue when she says Excel works. He asks about what happens when it does not.

Discovery: two or three questions, not an interview

On a cold call you have time for two or three questions. Pick them before the call. Good ones are open, specific and easy to answer: "How do you handle X today?", "What happens when Y goes wrong?", "Who else is involved when you change Z?". If you want a structure, SPIN questions make a good checklist of situation, problem, implication and need questions. If you bring an insight the prospect has not considered, the Challenger approach shows how to teach without lecturing.

Listening, and how much to talk

Once the opener is done, let the prospect do most of the talking. The best-known data on this comes from longer sales calls, not cold calls: in a 2025 update of Gong's talk-to-listen research, based on 326,000 calls of at least ten minutes, reps talked 57% of the time on deals they won and 62% on deals they lost. On a cold call the balance shifts toward the caller at the start, but the rule holds: after your question, stop talking. Our article on the talk-to-listen ratio goes into the research.

Voice, pace and language

The prospect hears your voice before your words. A few habits that help, none of which needs a study:

  • Slow down. Most nervous callers speak too fast in the first ten seconds, exactly when the prospect is trying to place them.
  • Pause after your question. Count to two in your head before you fill a silence.
  • Stand up or sit straight during a call block. Your voice carries better and you stay alert longer.
  • Use their words. If she said "emergencies", say "emergencies", not "unplanned service requests".
  • Match the language and the register. In Brussels and Wallonia, open in French unless you know the person prefers Dutch. In Dutch, start with the formal u with someone you do not know, especially in Flanders and with senior people, and switch to je when they do. In the Netherlands many B2B conversations move to je within a minute.

Script tics give a caller away faster than an accent: reading a sentence too evenly, using the prospect's first name every sentence, or saying "great question". Record yourself in a role-play (not a live call without consent) and listen once a week. Our article on sales role-play has exercises.

Objections: one method, twelve answers

Most objections on a cold call are brush-offs, not considered decisions, so do not argue with them. Find out what is behind the objection with one calm question, answer in a sentence, and propose a smaller next step. And when someone asks you to stop calling, stop.

What the data says

Gong grouped the objections in its cold call dataset into three kinds: dismissive ones such as "not interested" or "send me some information" (49.5%), situational ones such as "no budget" or "no time" (42.6%), and "we already have a solution" (7.9%). The five most common objections made up 74% of all of them (Gong, July 2024). Cognism's 2025 report lists a similar top five: not interested, don't have the problem, already have a solution, busy so call back later, and email me instead. In other words: prepare answers for about five objections and you are ready for three calls in four.

The method in five steps

  1. Pause. One second. It shows you heard it and stops you from reacting.
  2. Acknowledge. "Fair enough." "I understand." No "but" after it.
  3. Ask one question. "Is that because you already have something for it, or because it isn't a priority right now?"
  4. Answer in one or two sentences. Only about what they just said.
  5. Propose a smaller step. A shorter meeting, a call-back on a date, or one useful email.

The twelve objections you will hear

The answers below are starting points in our own words. Adapt them to your offer and say them in your own voice.

ObjectionWhat it often meansA possible answer
"Not interested.""I don't know you and I'm busy.""Fair enough, I called out of the blue. Is that because planning isn't an issue for you, or because now isn't the moment?"
"Send me an email."A polite way to end the call, sometimes real interest."Happy to. So I send something useful: what would you need to see to decide whether it's worth 20 minutes?"
"We already have a solution."Often true, sometimes "we have Excel"."Good to hear. What do you use? ... And what does it not do that you'd like it to?"
"No budget.""Not a priority" or "I'm not the one who decides"."Understood. If it saved [their problem], would it be something you'd plan for next year, or not even then?"
"No time."Usually literal, right now."Then I won't keep you. When is a better moment: later this week or next week?"
"Call me in six months."A soft no, or a real timing issue."Will do. What changes in six months, so I call you at the right moment?"
"How did you get my number?"A fair question, and a legal one.Answer exactly: the source, and offer to remove the number if they prefer.
"We do it in-house."They may be proud of it."Makes sense. Who does it now, and how much of their week does it take?"
"It's too expensive."On a cold call: a guess, since you named no price."I haven't told you a price yet, so let's first see if it fits. What would it need to save to be worth it?"
"I'm not the right person."Useful information."Thanks for saying so. Who would you ask about it internally?"
"We're in the middle of a contract."Timing, not fit."When does it run out? People usually start looking three months before."
"What's this about?" (in the first seconds)They missed your opener.Repeat the reason in one sentence, then ask your first question.

Keep these answers where the caller can see them during the call, not in a document nobody opens. In Ringlane they sit in the Arguments panel next to the script (Plus and Pro). Our article on sales objection handling works through more examples, and loss aversion in sales explains how to name the cost of doing nothing without manipulating anyone.

"Please don't call me again" is not an objection

When someone says they do not want to be called again, thank them, confirm you will not call again and end the call. In the Netherlands the ACM says you must then remove the number from your call list immediately; in Belgium an objection made to you directly counts alongside the Do Not Call Me list; under the GDPR the right to object to direct marketing is unconditional. Log it the same minute and exclude the person from every channel, including email and LinkedIn. In Ringlane, log Not interested with the reason your team uses for this, and the lead closes.

Gatekeepers, switchboards and phone menus

The person at reception is not your opponent. Their job is to protect a colleague's time and to route calls to the right place, so the fastest way past them is to be clear, honest and brief, and to ask for their help in finding the right person.

At the switchboard

Say who you are and what it is about in one sentence, then ask a routing question. Do not pretend to be expected, and do not hide that it is a sales call: apart from the rules, receptionists remember. A fictional example:

Reception: "Van Damme Installaties, good morning."

Tom: "Good morning, this is Tom from Fieldwise. I'd like to speak to the person who plans your service technicians. Who would that be?"

Reception: "That's Koen, but what is it about?"

Tom: "It's a sales call, about planning software. I'd like to ask Koen two questions to see if it's relevant. Is he in today, or is there a better time to reach him?"

Reception: "He's on the road until noon. Try after two."

Tom: "Thank you. Does Koen have a direct number, or should I call this one?"

Even when you do not get through, you leave with a name, a time and often a direct line. Note all three, plan the call-back at that time, and use the receptionist's name next time.

For phone menus, choose sales or general enquiries and ask the person who answers to route you, the same way as at a switchboard. Do not choose "support" or "existing customers" to get through faster: you start the conversation with a trick. If you reach a general mailbox, leave no message; call back at another time.

Find the name before you call

The easiest gatekeeper is the one you skip by asking for a name. Two minutes on the company website and LinkedIn usually give you the name of the person who owns the problem. Asking for "Koen, who plans your technicians" goes through more often than asking for "whoever handles planning". See LinkedIn and cold calling for how to find the right person before you call.

Voicemail, email and LinkedIn after a missed call

Leave a short voicemail on some missed calls, not on all of them, and send a short email straight after. The point of a voicemail is not a call-back: it makes your email recognisable.

Voicemail: short, and not every time

Gong's data on 300 million cold calls is the clearest we found. Leaving a voicemail raised the email reply rate from 2.73% to 5.87%, but prospects who got voicemails picked up later calls less often (5.17% against 7.18%), and after three or more voicemails the email reply rate fell to 2.2%, below the rate with no voicemail at all (Gong, August 2024). The practical rule: one or two voicemails per lead, linked to an email.

Keep it under 20 seconds: name, company, one reason, and a pointer to the email.

"Hi Sarah, Tom from Fieldwise. I'm calling about how you plan service visits now that you're hiring technicians. I'll send you a short email with one question; reply there if it's relevant. Thanks."

The email after a missed call

Send it within the hour, with three sentences: why you called, one question, and an easy way to say no. Remember the rules from the rules chapter: email marketing to individuals needs consent in most cases, so check what applies to your list before you send.

Subject: Planning at Van Damme
Hi Sarah, I tried to call you this morning. We help installation companies keep their planning upright when an emergency comes in. Is that a problem worth 20 minutes for you, or should I stop trying? Tom

Calling helps email too. In Gong's data, prospects who were also called replied to emails at 3.44%, against 1.81% for prospects who only got emails, even when the call did not connect.

LinkedIn: connect with a reason, do not pitch

After the second or third attempt, send a connection request without a sales message, or with one sentence about why you called. Do not automate it: LinkedIn's User Agreement bans bots and unauthorised automated methods that add contacts or send messages.

Text messages and WhatsApp

Use them only for logistics after a real conversation, for example to confirm a meeting the prospect agreed to, and only on a number they gave you for it. As a cold first touch, a text message counts as electronic mail under the ePrivacy Directive, which requires prior consent from individuals.

Booking the meeting, and making it happen

When the prospect agrees, book the meeting before the call ends: offer two concrete times, send the calendar invitation while you are still talking, and ask them to accept it. A yes without a calendar entry is the easiest meeting to lose.

What you need before you propose a time

You need three things: a problem the prospect named in their own words, a reason why a meeting helps with it, and a sense of whether this person can decide or needs someone else in the room. Without the first two you book a meeting nobody wants; without the third you book the wrong person. Our qualified meeting checklist lists what to check before the ask.

The ask: small, specific, two options

Ask for a short meeting with a clear goal and two concrete times, not "when suits you?". Research on commitment suggests that small, specific, active commitments are kept more often than vague ones; our article on asking for the meeting covers the studies and their limits.

Tom: "Would 20 minutes make sense to see whether it fits your way of planning? I have Tuesday at 10 or Thursday at 2."

Sarah: "Next week is full."

Tom: "Then the week after: Tuesday the 17th at 10, or Wednesday the 18th at 4?"

Sarah: "Wednesday."

Tom: "Wednesday the 18th at 4, 20 minutes on video. I'm sending the invitation to sarah@... now. Can you click accept while we're on the line, so I know it arrived?"

Send the invitation during the call

The invitation is the commitment. Send it from your calendar with a video link while the prospect is still on the line, and ask them to accept. In Ringlane you press A, pick a free moment from your Google Calendar, and Ringlane books the meeting with a Google Meet link if you choose one and sends the invitation; with Attio connected, the company, contact and deal go to your CRM as well. See book a meeting in the Academy, and our article on booking the meeting on the call for the full routine.

Confirm the same day, remind the day before

Send a two-line confirmation the same day with the goal of the meeting and who will join, and a short personal reminder the day before. Reminder research comes from healthcare, not sales, but it is consistent: in a 2016 meta-analysis in BMJ Open, patients who got a text reminder missed 15% of appointments, against 21% without.

When the prospect does not show

Wait five minutes, send a friendly message with two new times, and call once the same day. Do not send three reminders and a guilt-trip. Measure your show rate per caller: a low show rate usually means meetings were pushed, not agreed. Our article on reducing no-shows has the routine and the reminder texts.

The handover, if someone else takes the meeting

If an SDR books for an account executive, the handover note is part of the meeting. Write down the problem in the prospect's words, who joins, what was promised and anything that might come up. Three lines are enough; a meeting where the prospect has to repeat everything starts badly.

The phone inside a multichannel sequence

The phone works best as the backbone of a short sequence with email and LinkedIn around it, not as a channel on its own. In The Bridge Group's 2025 survey, the median SDR logged 112 activities a day: 44 phone, 41 email, 19 LinkedIn and 8 text or other (The Bridge Group, 2025).

A three-week sequence

DayTouchPurpose
1Call (late morning)First attempt
2Call (afternoon) + voicemail + emailSecond attempt, make the email recognisable
5Call + LinkedIn connection requestThird attempt, a face to the name
9Call + short email with one useful ideaFourth attempt, give before you ask
14Call at an untried timeLast attempt
16Closing emailAsk whether to stop, and close the loop politely

After a real conversation the sequence stops and follow-up takes over, on the date you agreed. The template, with its variations per segment, is in sales cadence, and the rules for follow-up after a conversation are in sales follow-up. For leads that come in by themselves, speed matters more than any sequence: see speed to lead.

Stop rules

  • Stop at once when someone asks you to, in every channel.
  • Stop after the last touch of the sequence. Park the lead for three to six months if the fit is good, or close it.
  • Stop when you learn the company does not fit, and note why. The reasons are data for your next list.

Call blocks, routines and the mindset

Call in fixed blocks of 60 to 120 minutes with the list ready and everything else closed, and do the admin after the block. Calling between other tasks costs you the warm-up every time and makes it easy to stop after the first no.

Before the block: ten minutes

  • Check that the list for the block is ready: right segment, numbers checked, legal form and Do Not Call Me checks done.
  • Read your script and the top five objections once, out loud.
  • Set a goal for the block in conversations, not in meetings. Conversations are in your control; meetings follow.
  • Close email, chat and notifications.

During the block

One lead, one call, one outcome, next lead. Log the outcome and the next step before you dial again, never "later". In Ringlane the call block works this way: the lead, the script and the arguments on one screen, an outcome with one key, and the next lead lined up. Research on task switching, which our article on call blocks summarises, explains why this beats calling in between other work.

After the block: fifteen minutes

  • Send the emails you promised and the confirmations of booked meetings.
  • Check that every lead you spoke to has a dated next step.
  • Write down one thing that worked and one objection you did not answer well.

Rejection is part of the math

At the average rates in Gong's data, about 95 of every 100 dials do not reach the prospect, and most conversations end without a meeting. That is the base rate of the channel, not a verdict on you. Judge your day on what you control: blocks done, conversations held, questions asked. Our article on handling rejection in cold calling covers what the research says helps.

Calling as a team

A shared block, where the whole team calls at the same time for an hour, makes it easier to start and gives new callers someone to ask. Keep it short, end with a five-minute round of "best line of the hour", and do not turn it into a leaderboard of meetings for beginners: compare conversations and learning, not only results.

Measure and improve: the weekly review

Measure a short chain per caller and per campaign every week, compare it with your own last four to six weeks, and change one thing at a time. The point of the numbers is to find the weakest step, not to rank people.

The numbers to track

KPIFormulaIf it is low, look at
Call attemptsDials per caller per day or weekBlocks in the calendar, list readiness
Connect rateRight person reached ÷ attemptsNumbers (switchboard or direct), time of day
Meeting rateMeetings ÷ conversationsOpener, reason for calling, the ask
Meetings per 100 dialsMeetings ÷ attempts × 100The whole chain at once
Show rateMeetings held ÷ meetings bookedInvitation on the call, reminders, pushiness
Close rateDeals ÷ meetings heldQualification and list fit
Reasons for "not interested"Count per reasonSegment, angle, timing

The formulas and examples are in cold calling KPIs; for the wider set of sales numbers, from pipeline to quota, see our topic page on sales KPIs. If you start with a spreadsheet, our free cold call tracker has the columns.

A 20-minute weekly review

  1. Look at the chain for the week per campaign: attempts, connect rate, meeting rate, show rate.
  2. Find the step that is furthest below your own average.
  3. Read the top three reasons for "not interested" in that campaign.
  4. Listen to or role-play two calls at that step.
  5. Pick one change for next week and write it down.

Ringlane builds this chain from the outcomes callers log, so nobody has to keep a tally: totals and the funnel on every plan, per campaign and per caller with the reasons for "not interested" from Plus. See read your reports in the Academy.

Test one variable at a time

Change one thing per cycle: the opener, the reason for calling, the time slot or the segment. If you change three things and the numbers move, you do not know why. Give each test enough volume, as described in how to test an opener, and keep a short log of what you tried.

Listening to calls

Numbers show where a call fails; listening shows why. If you want to record calls for coaching, tell the prospect at the start and follow the rules on monitoring employees as well. Without recordings, role-play the weak step with a colleague. Our article on coaching a sales team with data shows how to combine both and links the Dutch and Belgian guidance on recording work calls.

Training a new caller

A new caller can reach a competent level in about four weeks of daily practice and live calls; mastery takes longer. The Bridge Group puts the average SDR ramp at 3.0 months in its 2025 survey, which is a fair expectation for full productivity.

A four-week plan in short: week one on the list, the script and logging; week two on openers and the first 30 seconds; week three on objections and the ask; week four on follow-up and self-review. Practise every new skill in role-play before using it on a live call, review one call a day, and track connect rate and meeting rate weekly. The full programme, with exercises and a ten-point scorecard, is in cold calling training.

Tools: what you actually need

A calling team needs three things: a way to make the call, a place to work from during the call, and a system of record afterwards. Most small teams have the first and the last and run the middle in a spreadsheet.

The three layers

LayerWhat it doesExamples
The phone lineMakes the call: your phone, a softphone or a dialer, with numbers, recording and call logsAircall, CloudTalk, Ringover, JustCall, Microsoft Teams, Zoom Phone
The working screenWhat the caller sees during the call: the lead, the script, the answers to objections, the outcome and the next stepA spreadsheet, a calling workspace such as Ringlane
The system of recordCompanies, contacts, deals and history after the callA CRM such as Attio, HubSpot or Pipedrive

Manual, power or parallel dialing

A manual call, clicked or dialled by the caller, is enough at the volumes in The Bridge Group's survey (56 dials a day on phone-centric teams). A power dialer calls the next number as soon as the last call ends, which saves the seconds between calls but leaves less time to read up on the next lead. A parallel dialer calls several numbers at once and connects the first person who answers; that raises the number of conversations per hour, but the prospect may hear a short silence before you speak, and anyone else who answers at the same moment may get a dropped call. For a B2B list with researched leads, the time you lose between calls is rarely the bottleneck; the list and the conversation are. More detail in cold calling software.

Each kind of dialer, the rules on silent calls and how to measure the gain are in our comparison of power, auto, predictive and parallel dialers. What the system of record must do for callers is in what a CRM for cold calling needs.

What AI does well, and what it does not

AI is useful around the call: summarising a company before you dial, drafting a follow-up email, sorting the reasons for "not interested", or answering questions about your own numbers. It is risky in the call itself: an AI voice agent that calls on your behalf runs into the consent and transparency rules described in the rules chapter. Our article on AI in sales separates what helps today from what does not.

When a spreadsheet is enough

One caller, one list, a few hundred leads: a spreadsheet works, as long as every row has an outcome and a next date. It breaks when a second caller joins, when call-backs start to slip, or when you want to see per campaign why people said no.

What Ringlane is, and what it is not

Ringlane is the middle layer: the screen your callers work from and the numbers you read afterwards. It is not a dialer and not a CRM. You call with your own phone (click to call with your phone or softphone on Plus and Pro) and keep your CRM; Attio is the CRM Ringlane connects to today. You import your own leads from Excel, CSV or Bizzy; Ringlane does not supply leads. You build your own reports, with a funnel from Plus and the best time to call per weekday and hour on Pro. What is coming, with the status from the roadmap:

  • Coming soon: the AI assistant Ask Ringlane from late November 2026.
  • In development: a deeper Aircall integration that starts and logs calls automatically, and a compliance pack with a check against the Belgian Do Not Call Me list, your own do-not-call list and a data processing agreement.
  • Planned: more softphones (CloudTalk, Ringover), call summaries from recorded calls (only with consent, transcribed in the EU), HubSpot and Teamleader next to Attio, and Ringlane's own telephony on the Business plan.

Do it yourself or outsource?

Call yourself first if you can. The first few hundred calls teach you which segment answers, which problem resonates and which objections come back, and that knowledge is hard to buy. Outsource when you know what works and need volume, or when nobody in the company can free up the hours.

If you outsource, choose an agency on how it reports, not only on its price per meeting: ask for the weekly chain from attempts to held meetings, per campaign and per caller, with the reasons prospects said no. Our topic page on sales outsourcing covers the options, and in-house SDR vs outsourced appointment setting compares cost and control. If you run an agency yourself, Ringlane lets you invite external callers, let each caller see only their own leads, and report per campaign and per caller with the reasons prospects said no (all on Plus).

Checklists and a 30-day plan

Print these, or put them at the top of your script. They sum up the guide in the order you need it.

Before a campaign

  • One segment: sector, size, region, role.
  • One angle and one reason to call now, written in the prospect's words.
  • List split by country and legal form; Dutch sole traders and partnerships removed unless they consented.
  • Belgian numbers checked against the Do Not Call Me list, with a dated proof; your own objection list checked in both countries.
  • Legitimate interest assessment written; source and import date of the list recorded.
  • Script in six moves, with the top five objections and answers.
  • Calendar connected, so you can book on the call.

Before each call block

  • Block in the calendar, notifications off.
  • Goal for the block in conversations.
  • Script and objections read aloud once.
  • Water, headset, a standing position if you can.

During each call

  • Name, company, that it is a sales call; in Belgium also the source and the right to object.
  • Reason for calling this person, then a question.
  • Listen; follow up on their words.
  • Ask for a short meeting with two times; send the invitation on the call.
  • Log the outcome and the next step before the next dial.
  • A request to stop: thank, confirm, log, exclude everywhere.

A 30-day plan for a new caller or a founder

DaysFocusDone when
1 to 5Segment, list of about 200 leads, rules check, script in six moves, five objectionsThe list is checked and the script fits on one screen
6 to 10Two call blocks a day; openers only; log every outcomeAbout 200 dials logged, with a first connect rate
11 to 15Discovery questions and the ask; book on the callFirst meetings booked with an invitation sent during the call
16 to 20Objections: role-play the three you handle worst; voicemail and email after missed callsAnswers for the top five objections in the script
21 to 25First weekly review; change one variableOne test running, with the previous numbers written down
26 to 30Follow-up of every conversation; second review; plan the next campaignEvery lead you spoke to has a dated next step, and you know your own dials per meeting

After 30 days you will not have a perfect script, but you will have something more useful: your own connect rate, your own meeting rate and your own reasons for "no". From there, every chapter in this guide becomes a lever you can measure.

Where Ringlane fits

Ringlane is the calling workspace for B2B teams: one screen with the lead, the script and the answers to objections, six outcomes with one key each, and the next step planned after every call. The Today view puts overdue call-backs first, meetings are booked in Google Calendar while the prospect is on the line, and the reports show the chain from attempt to meeting, per campaign and per caller with the reasons for "not interested" from Plus. There is a free plan for one caller and paid plans per user; see pricing. To see how a calling session works, read the call block in the Academy or try the demo.

Frequently asked questions

What is B2B cold calling?
B2B cold calling is phoning a business that has had no contact with you, to start a sales conversation with the person who owns a problem you solve. The goal is rarely a sale on the phone. It is a next step, usually a meeting of 20 to 30 minutes, or a clear no.
Is cold calling still effective in 2026?
Yes, at small rates. In Gong's analysis of more than 300 million cold calls, the average rep reached the prospect on 5.4% of dials and booked a meeting in 4.6% of conversations, while the top quarter reached 13.3% and booked 16.7%. List, timing and skill explain the gap, not the channel.
Is B2B cold calling legal?
In Belgium and the Netherlands, yes, with rules. In the Netherlands you may call companies with legal personality, but consumers, sole traders and partnerships only with prior consent since 1 July 2026. In Belgium you may call unless the number is on the Do Not Call Me list, which covers business numbers. The GDPR applies in both. This is general information, not legal advice.
What is a good cold calling success rate?
It depends on the denominator. Per dial, booking a meeting on 0.25% is average in Gong's data and about 2% is top-quarter level. Per conversation, 4.6% is average and 16.7% is top quarter. Compare yourself with your own last four to six weeks rather than with a vendor's number.
How many cold calls should you make a day?
Phone-centric SDR teams in The Bridge Group's 2025 survey averaged 56 dials a day, against 28 on email-centric teams. A founder who calls part-time can do well with one or two blocks of 60 to 90 minutes a day. Work backwards from the meetings you need and your own dials per meeting.
What is the best time to cold call?
In Cognism's 2025 data, calls lasted longest between 10 and 11 am and then between 2 and 3 pm, and Tuesday had the most booked meetings. Studies disagree on the details, so start there, then split your list into a morning and an afternoon campaign and compare your own connect rates.
How many times should you call a prospect?
Three to five attempts, spread over different days and times. In Cognism's 2025 data, three attempts captured 93% of all conversations and five captured 98.6%. After that, park the lead or stop. Stop at once, in every channel, when someone asks you not to call again.
Should you leave a voicemail on a cold call?
Sometimes. In Gong's data, voicemails raised email reply rates from 2.73% to 5.87% but lowered the pick-up rate on later calls, and three or more voicemails pushed email replies down to 2.2%. Leave one or two short voicemails per lead and link each to an email.
What should a cold calling script contain?
Six moves: open with who you are and that it is a sales call, give the reason you called this person, ask one problem question, give one sentence of value, ask for a short meeting with two time options, and confirm the details. Keep each move to one or two sentences and the objection answers next to it.
How do you get past a gatekeeper?
Be clear and honest and ask for help with routing. Say who you are, that it is a sales call and which role you are looking for, then ask who that is and when they are easiest to reach. Even without being put through, you leave with a name, a time and often a direct line.
What do you say when a prospect says send me an email?
Agree, then make the email useful: ask what they would need to see to decide whether a short meeting is worth it, confirm the address and say when you will call back. Often it is a polite way to end the call, and the question shows whether there is real interest.
Do you need a power dialer for B2B cold calling?
Usually not at first. The 56 dials a day of phone-centric teams in The Bridge Group's survey are manageable with click-to-call. Power and parallel dialers save time between calls, but for a researched B2B list the list and the conversation are usually the bottleneck, not the seconds between dials.
How long does it take to get good at cold calling?
Most new callers reach a competent level in about four weeks of daily practice and live calls. Full productivity takes longer: The Bridge Group's 2025 survey puts the average SDR ramp at 3.0 months. Practise each skill in role-play first and review one call a day.

Sources

  1. Gong Labs: The hidden power of cold calling, insights from 300M calls (Armand Farrokh, 18 July 2024)
  2. Gong: The best and worst cold call openers, backed by data from 300M calls (24 July 2024)
  3. Gong: We found the top objections across 300M cold calls (31 July 2024)
  4. Gong Labs: Should you leave voicemails when cold calling? Here's what the data says (8 August 2024)
  5. Gong: Mastering the talk-to-listen ratio in sales calls (2025 update on 326,000 calls, published 21 August 2025)
  6. Cognism: The State of Cold Calling in 2025 (online since February 2025)
  7. The Bridge Group: SDR Models, Motions and Metrics 2025 (351 companies, 6 February 2025)
  8. RAIN Group Center for Sales Research: study of 488 buyers and 489 sellers on prospecting (press release via CustomerThink, 6 February 2018)
  9. Gartner: Sales survey finds 61% of B2B buyers prefer a rep-free buying experience (632 buyers, 25 June 2025)
  10. Robotham et al.: Do text messages reduce the number of people who do not attend appointments? Systematic review and meta-analysis, BMJ Open (24 October 2016)
  11. ACM: Vanaf 1 juli strengere regels voor telemarketing (25 June 2026, in Dutch)
  12. Business.gov.nl: Rules for telesales (checked by the publisher 20 March 2026)
  13. KVK: Direct marketing en regelgeving (updated 10 August 2026, in Dutch)
  14. FPS Economy: Guidelines on direct marketing by telephone (version 9 February 2026, in French)
  15. Do Not Call Me vzw: information and licences for telemarketers (in Dutch, checked 29 October 2026)
  16. Belgian Data Protection Authority: Recommendation 01/2025 on direct marketing (in French, checked 29 October 2026)
  17. FPS Economy: CBE Public Search (last updated 22 October 2026)
  18. GDPR, Article 14: information when data were not obtained from the person (gdpr-info.eu)
  19. GDPR, Article 21: right to object (gdpr-info.eu)
  20. Directive 2002/58/EC (ePrivacy Directive), Article 13 on unsolicited communications, as amended in 2009 (legislation.gov.uk)
  21. AI Act Service Desk: Article 50, transparency obligations (checked 29 October 2026)
  22. ICO: Telephone marketing under PECR, United Kingdom (checked 29 October 2026)
  23. Gesetz gegen den unlauteren Wettbewerb (UWG), § 7, Germany (checked 29 October 2026)
  24. LinkedIn: User Agreement, effective 3 November 2025 (section 8.2)
  25. VDAB: workshop Prospectie light, on telephone prospecting (in Dutch, checked 29 October 2026)

Articles on this topic

Cold calling

Telephone prospecting: how B2B teams run it in 2026 (and how it differs from cold calling)

Telephone prospecting covers cold, warm and follow-up calls. The six-step approach, the numbers to expect, and the rules that apply in the Benelux.

· 7 min read
Research

Is cold calling dead? What research on B2B buyers actually says

Is cold calling dead? Buyer surveys and data from millions of calls say no, but buyers punish irrelevant outreach. What the research shows and what to change.

· 7 min read
Data

Cold calling benchmarks 2026: connect, conversation and meeting rates from four datasets (with denominators)

Connect rate, meeting-set rate, dials per day, call length and attempts from Gong, Cognism and The Bridge Group, each rate with its denominator.

· 8 min read
Rules

Is cold calling legal in Belgium and the Netherlands? Rules for 2026

Cold calling rules Belgium Netherlands: who you may call in 2026, the Dutch consent rule, the Bel-me-niet-meer list, GDPR duties and a checklist.

· 9 min read
Cold calling

B2B cold call script: template and examples

Write a cold calling script that books B2B meetings: a copyable template, discovery questions, persona tweaks and a modular layout callers can scan.

· 8 min read
Cold calling

Cold call opening lines: what the research actually shows

Which cold call opening lines work? What Gong's vendor data on openers shows, where it falls short, and a 20-second opener you can test on your own calls.

· 7 min read
Cold calling

SPIN questions on a cold call: how to use them and turn them into a checklist

SPIN selling questions for cold calls: Situation, Problem, Implication, Need-payoff. Examples per type, the research behind SPIN and a script checklist.

· 8 min read
Cold calling

The Challenger Sale applied to cold calls: teach, tailor, take control

How to use the Challenger Sale on a short cold call: one insight, tailored to the role, and a firm next step. With the research behind it and its limits.

· 8 min read
Cold calling

Sales objection handling: how to answer cold call objections

Sales objection handling for B2B cold calls: a five-step framework, a table of common objections with example answers, and how to keep them at hand.

· 7 min read
Research

Talk-to-listen ratio in sales: what the research says about listening

What is a good talk-to-listen ratio in sales? What Gong's call data and listening research show, their limits, and five listening habits for cold calls.

· 7 min read
Research

Best time to make cold calls: what the studies say and how to test it

The best time to cold call according to four studies, why they disagree, and a simple test to find your own best calling hours and days in B2B.

· 7 min read
Cold calling

Call blocks: why focused calling sessions beat calling in between

Why cold calling works better in fixed call blocks: what research on task switching and interruptions says, and a simple routine for a focused calling session.

· 7 min read
Data

How many cold calls does it take to get one customer?

How many cold calls to get a customer? Use one funnel formula, a worked example and a rate table, then turn it into a weekly call target per caller.

· 7 min read
Cold calling

Handling rejection in cold calling: what research says helps

How to handle rejection in cold calling: what research on optimism in sales, self-compassion and self-talk says, and simple habits for callers and managers.

· 8 min read
Research

Loss aversion in sales: what the research says and how to use it honestly

Do losses weigh twice as much as gains? What research shows about loss aversion, its limits, and how to frame the cost of doing nothing honestly.

· 8 min read
Cold calling

Cold calling training: a 4-week programme you can run in-house (exercises, scripts, scorecards)

Train callers in four weeks without an external course: weekly goals, role-play, real calls, scorecards and the numbers that show progress.

· 9 min read
Cold calling

Cold calling software in 2026: dialers, CRMs and calling workspaces, and which one your team actually needs

Dialers, CRMs and calling workspaces do different jobs. What each adds, when a spreadsheet is enough, and what Ringlane is and is not.

· 9 min read
Cold calling

Power dialer vs auto dialer: preview, power, predictive and parallel dialing explained (2026)

Power, predictive, parallel or click-to-call? How each auto dialer works, the silent call problem and its rules, and which dialer fits a small B2B team.

· 11 min read