Sales pipeline stages for outbound B2B: 7 stages from first call to closed deal

In short

An outbound pipeline needs stages with exit criteria, not labels: target, contacted, conversation, meeting booked, meeting held, opportunity (proposal) and closed won or lost. The pipeline is the set of deals at each stage today; the funnel is the conversion between stages over time. Define each stage by an event anyone can check, such as 'meeting held', so every report means the same thing to everyone.

A sales pipeline is the set of deals your team is working on, grouped by the stage each one has reached. For an outbound B2B team that starts with a call list, seven stages cover the whole road: target, contacted, conversation, meeting booked, meeting held, opportunity and closed. The names matter less than the rule behind them: every stage ends with an event anyone can check, such as "a conversation was logged" or "the meeting took place". Then a deal only moves when something happened, and your reports mean the same thing to everyone who reads them. The KPIs that measure each stage are in our guide to sales KPIs.

Below: the difference between a pipeline and a funnel, the seven stages with their exit criteria, where each stage lives, how to keep the pipeline clean and which numbers to watch between stages.

Sales pipeline vs sales funnel

The pipeline is a snapshot of deals today; the funnel is the conversion between stages over time. You manage the first and read the second.

Salesforce describes the pipeline as a visual of where each prospect is in your sales process, and the funnel as the same kind of picture from the customer's point of view. HubSpot's guide adds a useful warning: a funnel suggests deals drop off evenly at every step, while in practice many drop out early, at qualification, and most that get past it go on to buy. Its image is a cocktail glass rather than a funnel.

PipelineFunnel
QuestionWhat do we work on now, and what is the next step?Where do deals leak, and how fast do they move?
UnitDeals per stage todayConversion rate between stages over a period
RhythmEvery week, deal by dealEvery month or quarter, as rates
Who uses itCallers and account executivesSales managers and founders

The seven stages, with exit criteria

Each stage below is defined by the event that ends it. Write these definitions down and share them; it is the cheapest way to make a pipeline trustworthy.

#StageWhat it meansExit criterion (the event)
1TargetThe company fits your customer profile and is on a call listA first contact attempt is logged
2ContactedYou tried to reach the right person, no conversation yetA conversation with the right person is logged
3ConversationYou spoke to the right person and got past the openerA meeting is booked, or a clear "not now" or "no" is logged
4Meeting bookedA date, a time and an accepted inviteThe meeting is held, or it is marked as a no-show
5Meeting heldThe first meeting took placeNeed, decision maker and timing are confirmed, or the deal is closed as no fit
6OpportunityA qualified deal with a proposal in preparation or sentThe proposal is accepted or rejected
7Closed won or lostThe decision is madeA reason is logged, for wins and for losses

Two choices in this table are deliberate. First, "meeting booked" and "meeting held" are separate stages, because the gap between them is real and fixable; our article on reducing meeting no-shows shows how. Second, stage 5 is where qualification happens. The Bridge Group's research uses the same split: a "stage 0" meeting is a held first meeting, "stage 1" is a meeting converted into an opportunity. In their 2025 survey of 351 B2B companies, the median SDR quota was 10 held stage 0 meetings and 6 stage 1 conversions a month. What a meeting must contain to count as qualified is set out in our qualified meeting criteria.

How many stages do you need?

Enough that each has its own checkable exit event; five to eight is common. Merge two stages if they always change on the same day. Split one if deals sit in it for weeks and nobody can say what they are waiting for. A team that sells in one meeting may skip stage 6; a team with long enterprise deals may add "negotiation" or "contract".

Where each stage lives: calling tool and CRM

The top of an outbound pipeline lives where the calls are logged; the rest lives in the CRM. Stages 1 to 4 change many times a day per caller: every dial, every "call back Thursday", every booked meeting. Stages 5 to 7 change a few times a week per account executive, with notes, proposals and amounts. Forcing callers to update a CRM deal after every dial slows them down; leaving the top of the pipeline in a private spreadsheet hides it from the manager.

The clean split is a handoff at "meeting booked": the calling tool owns everything up to and including the booking, and the meeting arrives in the CRM as a new deal with the conversation notes attached. From there the CRM owns the deal.

Pipeline hygiene: stale deals and missing next steps

A pipeline is only as useful as it is clean. Three rules keep it that way:

  1. Every open deal has a next step with a date. A deal without one is not in the pipeline; it is in a drawer.
  2. Look at deals that sit too long. Pipedrive's guide to pipeline management suggests comparing how long each deal has been in a stage with the average, contacting the slow ones to check whether interest is still there, and moving deals back a stage when circumstances change, for example when your contact leaves the company.
  3. Close what is dead, with a reason. A lost deal with a reason teaches you something; a deal that stays open forever only inflates the pipeline. Our article on win/loss analysis shows how to use those reasons.

Review the pipeline once a week, deal by deal, and the funnel once a month, as rates.

The numbers to watch between stages

Each step between two stages has one conversion rate, and each rate points to a different fix.

From → toRateIf it is low, look at
Contacted → conversationConversations ÷ attemptsList quality, phone numbers, time of day
Conversation → meeting bookedMeetings ÷ conversationsOpener, objections, the ask
Booked → heldShow rateConfirmation, reminders, the quality of the yes
Held → opportunityOpportunities ÷ held meetingsTargeting and qualification on the call
Opportunity → wonWin rateProposal, price, competition, timing

The formulas for the calling steps are in cold calling KPIs. To check whether there is enough in the pipeline for your target, use pipeline coverage; to forecast from activity at the top, see leading vs lagging sales indicators.

A worked example

These are example numbers for a small outbound team over one quarter, not a benchmark:

Stage reachedDealsConversion from previous stage
Target1,200
Contacted1,00083%
Conversation25025%
Meeting booked4016%
Meeting held3280%
Opportunity1650%
Closed won531%

Read it from the bottom. Five new customers needed 16 opportunities, 32 held meetings and 40 bookings. The biggest leak is from conversation to meeting, so that is where coaching pays off first. The quietest stage, target, is where 200 companies were never even tried: free pipeline, if the list is right.

Where Ringlane fits

Ringlane covers the top of the pipeline, up to the booked meeting. Its lead statuses follow the stages above: New, Contacted, In conversation, Later, Meeting, and the closed statuses Not interested, Unreachable and Invalid. Each status changes through one of six call outcomes, so the stage is always an event, not an opinion. From Plus, a booked meeting goes to Attio, where the deal continues. Ringlane has no deal stages after the meeting and does not track amounts or forecasts: that is the CRM's job. HubSpot and Teamleader are planned as CRMs next to Attio; see the roadmap. You can also build your own reports and click through to the leads behind every number. The Academy guides to the six outcomes and connecting Attio show how the handoff works.

Frequently asked questions

What are the stages of a sales pipeline?
For an outbound B2B team, seven stages work well: target, contacted, conversation, meeting booked, meeting held, opportunity with a proposal, and closed won or lost. Each stage ends with an event you can check, such as a logged conversation or a held meeting, so a deal never moves on a feeling.
What is the difference between a sales pipeline and a sales funnel?
The pipeline is a snapshot: which deals sit at which stage today, and what the next step is for each. The funnel is a rate over time: how many deals move from one stage to the next in a month or a quarter. You manage the pipeline every week and read the funnel to see where deals leak.
How many stages should a sales pipeline have?
Enough that each stage has its own checkable exit event, and no more. Five to eight stages is common. If two stages always change on the same day, merge them; if deals sit in one stage for weeks without anyone knowing why, that stage probably hides two steps.
What is a stage 0 meeting?
In The Bridge Group's SDR research, a stage 0 meeting is a first meeting that was held, before anyone has confirmed it is a real opportunity; stage 1 is the meeting converted into an opportunity. In their 2025 survey the median SDR quota was 10 held stage 0 meetings and 6 stage 1 conversions a month.

Sources

  1. HubSpot: Sales pipelines, a comprehensive walkthrough for sales leaders and reps (updated 4 December 2025)
  2. Salesforce: What is a sales pipeline? (25 March 2025)
  3. Pipedrive: What is sales pipeline management? (23 September 2026)
  4. The Bridge Group: SDR Models, Motions and Metrics 2025 (6 February 2025)