Build a report

Put together your own report: choose a type and a source, filter, measure and group, pick a chart and click through to the leads behind every number.

NewPlan Free, Plus, Pro and BusinessFor Owner, Admin, Manager9 min
What you'll learn
  • Choose the type of report: Build your own or Pipeline reports
  • Data source, filters and metric
  • Group and segment, and which values count
  • Which visualization fits what, with its options
  • Choose the steps of a funnel
  • View and export calculated values
  • Click through to the leads behind a number

A report is one card on a dashboard. You put it together yourself: which data, which filters, what you measure and how you show it. Ringlane calculates it right away, and behind every number you find the leads. You build reports on your own dashboards. An owner or admin can also put reports on the Calling dashboard; other members copy a card from it to a dashboard of their own.

Start a report

  1. Open a dashboard of your own under Reports. If you don't have one yet, create one with New dashboard. See Reports and dashboards.
  2. Click New report at the top right, or the box with the plus sign after the last card.
  3. The builder opens empty. On the left is an empty card with Choose a report type. On the right Ringlane asks What do you want to report on?, with Choose the type of report you want to build. below it.
  4. Choose a type, such as Insight. See below.
  5. Under Data source, click Choose a source… and choose what the report counts. Until you do, the left side says Input needed to show a chart. Then the chart appears, and on the right the rest of the settings. For a leaderboard or a funnel, Ringlane chooses the source itself.
  6. Give the report a name at the top and, if you like, an explanation under Describe this report…. You'll read that explanation later on the card, behind the ⓘ next to the title.
  7. Click Save. You can only save once you've chosen a type and a source. Discard changes or the cross closes it without saving.

To change an existing report, choose More (⋮) › Edit on the card. It opens right away with all its settings. Rename opens the builder with the name ready to type. If you can't change the dashboard, or it's a fixed card on Calling, View opens the report without letting you change anything.

The type of report

For a new report you first choose the type. The types are in two groups, Build your own and Pipeline reports:

TypeGroupWhat it showsPlan
InsightBuild your ownThe current state of your work, split the way you want: per status, campaign, caller, day or weekAll plans
Historical valuesBuild your ownHow your data changes over timePro, coming soon
LeaderboardBuild your ownCallers, campaigns or teams side by side, with all their numbersFrom Plus; per team with Pro
FunnelPipeline reportsProgress and conversion from step to step, and where it stallsFrom Plus
Time in statusPipeline reportsHow long leads stay in each statusPro, coming soon
Status changedPipeline reportsHow many leads moved to a status per periodPro, coming soon

Each type shows the plan it belongs to, such as Plus or Pro. If it isn't part of your plan, Ringlane shows you the plans. Historical values, Time in status and Status changed also say Coming soon: you can't choose them yet, and Ringlane tells you they're coming soon.

Below the two groups is Useful resources › Documentation. It opens this guide in the Ringlane Academy, in a new tab. Learn more at the top of the builder does the same.

For Insight you first only see the type and Data source on the right. Once you choose a source, these follow from top to bottom: Add filter, Metric, Group by, Segment by, Visualization with its options, Target and Period. This guide follows that order.

You can switch the type later in the list at the top of the column on the right. For a leaderboard you only choose Per (Caller, Campaign or, with Pro, Team) and the Period. The rest of this guide is about Insight and Funnel.

Data source

Under Data source you choose what the report counts. For a new report it still says Choose a source…. One row is:

SourceOne row is
LeadsA lead, with its status, campaign, owner, sector, country, city and your own attributes
Call attempts and messagesA call or message from a lead's log, with the date, hour, weekday, channel, outcome, reason, caller and their team
MeetingsA booked meeting from the log, with the same details as a call attempt
TasksA lead with an open next step, with who it's for, the channel, the due date and how many days overdue
CampaignsA campaign, with its status, its leads and the call attempts and conversations in the period
MembersA member of your workspace, with their role, team and call attempts, conversations and meetings in the period

With call attempts, meetings and tasks you can also filter and group on the lead's details, such as the campaign or the status. If you choose Call attempts and messages or Meetings, the report starts grouped per day. If you choose another source, the filters, grouping and metric start over.

Filters

  1. Click Add filter and choose an attribute. Type in Search attributes… to find it quickly. Your own attributes are under Custom fields.
  2. Choose how it should be, such as is, is not, contains, greater than, after or is empty. For a caller or owner you can also choose is me. Which choices you see depends on the kind of attribute.
  3. Choose the value. In a list, tick one or more values and click Apply.

A row only counts if it meets all filters. The cross removes a filter. The filters at the top of the dashboard apply on top of these.

Metric

Under Metric you choose what each number is:

  • Count rows: how many leads, attempts, meetings or tasks. This is the default.
  • A number, such as a lead's Call attempts, Days since last action or one of your own number attributes. Next to it you choose Sum, Average, Min or Max.

Want your connect rate as a percentage? Choose Call attempts and messages as the source, Reached (1 or 0) as the metric and Average next to it. That is also how the Best time to call card on the Calling dashboard works. See The Calling dashboard.

Group and segment

  • Group by splits the number per value of an attribute: per status, campaign, caller, outcome or country. If you group by a date, you choose Per day, Per week or Per month. The cross next to Grouped by removes the grouping.
  • Segment by splits each group again by a second attribute. For example: call attempts per day, split by outcome. You can only segment after grouping, and segmenting is part of Plus.

If you group by an attribute with choices or by a person, such as the status, campaign, outcome or caller, you choose under Included statuses (or Included values) which values count:

  1. Click All values.
  2. Find a value under Search…, or use Select all and Deselect all.
  3. Tick the values that count. At least one always stays ticked.
  4. Click Apply. The button then shows, for example, 3/7 values.

Include empty values is on: rows without a value count as (empty). Turn it off to leave them out. If an attribute has more than twenty values, the rest is combined under Other, so the chart stays readable.

Which visualization fits

Under Visualization you choose how the report looks. Available visualizations depend on your grouping and segment. The card right away gets a size that fits the visualization; you can still change it on the dashboard. See Work with the cards.

VisualizationGood forAvailable when
Single metricOne total, large and centred, such as this week's meetings. Above it is what's counted, such as Count or Sum · Call attempts, below it the period.Always
BarComparing groups, such as call attempts per caller. With a segment you turn Stacked on or off. With Horizontal the bars run from left to right, handy for long names.You group
LineA trend over time, such as conversations per weekYou group
PieHow a whole is split, such as the outcomes of your callsYou group
TableThe exact numbers, with each group's shareAlways
HeatmapTwo attributes at once, such as the connect rate per hour and weekday. The fuller the colour, the higher the value. If you measure an average, a cell is only coloured from 5 rows; with fewer it's grey-hatched.You group and segment
MapYour numbers per country (Plus). For now the map shows a bar per country.You group by Country
FunnelSee The funnelFor a funnel

As soon as you group, a few more options appear under Visualization. Which ones you see depends on your visualization and your grouping. They aren't there for a single metric.

  • Show axis titles: the name of the metric and of the grouping next to the axes. For Bar, Line and Map. On by default.
  • Show zeros: also the options without rows in the period, such as an outcome nobody chose. For an attribute with fixed choices, such as the status or the outcome. Off by default.
  • Sorted by: Value, largest first, or Name, A to Z. For an attribute without fixed choices, such as the campaign or the caller.
  • Target: a value to aim for in the chart, per caller or team. Coming soon, in Pro.

Period

By default a report follows the period you choose on the dashboard under Filter: Dashboard period. If you want one card to always show something else, choose its own period: This week, Last week, This month, Last 30 days, Last 90 days, This year or Everything. How far back you can look depends on your plan. See Limits per plan.

The funnel

A funnel shows how much flows through from step to step. Funnels are part of Plus. Under Funnel you choose which one:

  • From attempt to meeting: Attempts and messages, Reached or replied, Meeting.
  • From lead to meeting: Leads, Contacted, In conversation, Meeting. A lead that skipped a step counts as past it: a lead with a meeting also counts as contacted and in conversation.

The data source comes with the funnel; you don't choose it separately. You can add filters. Below that you choose which steps count:

  1. Click All steps included. The Included steps window opens.
  2. Find a step under Search…, or use Select all and Deselect all.
  3. Switch each step on or off. At least one step always stays on.
  4. Click Apply. The button then shows, for example, 2/3 steps included.

As the visualization you choose:

  • Funnel: the steps side by side, with each step's share and count, and the average time between two steps.
  • Funnel steps: the steps as arrows, with the share of the previous step that went through.
  • Funnel metric: one percentage, how much of the first step reached the last.

Calculated values and the export

Below the preview is a bar with Calculated values, View contributing data and a download button.

  • Calculated values opens the numbers behind the chart, as a table.
  • With the download button you export that table as a CSV file, to keep working in Excel, Numbers or Google Sheets. The export is part of Plus; on Free the button shows a lock with Plus.
  • View contributing data opens all the leads behind the report. See below.

Click through to the leads

Behind every number are leads. Click a bar, a point on a line, a slice, a row in a table, a heatmap cell, a funnel step or a single metric. Leads then opens with exactly those leads. For all the leads behind the report, click View contributing data in the builder.

Above the list it says From report: with the report's name, what you clicked and the number of leads. That way a report becomes a list to call right away. The cross (Show all leads) shows all your leads again. If you go to another page, the selection ends by itself.

What belongs to which plan

FreePlusPro and Business
Insight, with filters, metric and groupingYesYesYes
Single metric, Bar, Line, Pie and TableYesYesYes
Viewing calculated values and clicking through to the leadsYesYesYes
Leaderboard per caller or per campaignYesYes
Leaderboard per teamYes
FunnelYesYes
Segmenting, and so the heatmapYesYes
Map, per countryYesYes
Export calculated values (CSV)YesYes
Historical values, Time in status and Status changedComing soon
Targets and comparing with the previous periodComing soon

How many reports of your own you can create and how far back they look is under Limits per plan.

If it doesn't work

  • New report is greyed out. Only the person who created the dashboard, or an owner or admin, puts reports on it. On Calling only an owner or admin can. Open a dashboard of your own, or copy a card with More (⋮) › Copy to an own dashboard.
  • Save is greyed out. For a new report you haven't chosen a type or a source yet. Choose a type on the right, and a source under Data source. For an existing report you haven't changed anything yet.
  • I can't choose Historical values, Time in status or Status changed. They're coming soon, in Pro. Ringlane then says, for example, Historical values is coming soon.
  • I can't choose a visualization. Bar, Line and Pie need a grouping. Heatmap also needs a segment, and Map a grouping by Country.
  • I see a lock with Plus or Pro. That part belongs to a higher plan. See Plans and billing.
  • Save opens the plans. You've reached your plan's number of own reports, or your report uses something from a higher plan, such as a segment. Delete a report you no longer use, remove the segment or choose a bigger plan.
  • The report says No data yet. There is nothing to show for the chosen period. Click Show everything, choose a longer period or check your filters.
  • A heatmap cell is grey-hatched. You're measuring an average, and that cell has fewer than 5 rows so far. Choose a longer period to fill more cells.
  • I don't see Show axis titles, Show zeros or Sorted by. They only appear once you group, and depend on your visualization and your grouping. They aren't there for a single metric.
  • A click shows no leads. There are no leads behind that point. Ringlane then says No leads behind this point.
  • An attribute of my own is missing. Reports use your own attributes with a choice, a yes or no, a number or a date. Not text. See Attributes.